missed files for 0.9

2 files changed, 314 insertions, 0 deletions

diff --git a/etc/polkit-1/localauthority/50-local.d/deployment.pkla b/etc/polkit-1/localauthority/50-local.d/deployment.pkla
new file mode 100644
index 0000000..283e1be
--- /dev/null
+++ b/etc/polkit-1/localauthority/50-local.d/deployment.pkla
@@ -0,0 +1,13 @@
+[AllowSignedUpdates]
+Identity=*
+Action=org.freedesktop.packagekit.package-install
+ResultAny=no
+ResultInactive=no
+ResultActive=yes
+
+[AllowNotSignedUpdates]
+Identity=*
+Action=org.freedesktop.packagekit.package-install-untrusted
+ResultAny=no
+ResultInactive=no
+ResultActive=yes
diff --git a/etc/sweets.d/etc/PackageKit/PackageKit.conf b/etc/sweets.d/etc/PackageKit/PackageKit.conf
new file mode 100644
index 0000000..f85fa74
--- /dev/null
+++ b/etc/sweets.d/etc/PackageKit/PackageKit.conf
@@ -0,0 +1,301 @@
+# Only the system administrator should modify this file, ordinary users
+# should not have to change anything.
+
+[Daemon]
+
+# Should we log transactions to the database.
+#
+# default=true
+TransactionLogging=true
+
+# Use NetworkManager where available. If disabled, then NM state will be ignored.
+#
+# default=true
+UseNetworkManager=true
+
+# Use Connman where available. If disabled, then Connman state will be ignored.
+#
+# default=false
+UseNetworkConnman=false
+
+# If neither NetworkManager nor ConnMan is not available, then use the presence
+# of default route to indicate a viable network connection.
+# If disabled, and no NM or CM, then the network is assumed to be always online.
+#
+# default=true
+UseNetworkHeuristic=true
+
+# If we should use the estimated time value.
+# This will be inaccurate where backends do not send proportional percentage
+# changed signals, or when updates are not frequent enough.
+# Estimated time will then only be used when the prediction accuracy is high
+# enough and will not be set at the very start or end of a transaction.
+#
+# default=true
+UseRemainingTimeEstimation=false
+
+# Shut down the daemon after this many seconds idle. 0 means don't shutdown.
+#
+# default=300
+ShutdownTimeout=300
+
+# Unlock the backend after this many seconds idle.
+#
+# default=5
+BackendShutdownTimeout=5
+
+# Set the priority of the spawned backend to this priority.
+# This ensures the process does not hog the system when performing actions.
+#
+# Values range from -20 (most favorable) to 19 (least favorable)
+# A niceness value of 0 will not attempt to set any priority.
+#
+# default=0
+BackendSpawnNiceValue=0
+
+# Set the priority of the spawned backend to this priority for low priority tasks.
+# This ensures the process does not hog the system when performing actions.
+#
+# Values range from -20 (most favorable) to 19 (least favorable)
+# A niceness value of 0 will not attempt to set any priority.
+#
+# default=10
+BackendSpawnNiceValueBackground=10
+
+# Set the iopriority class of the spawned backend to idle.
+# This ensures the process does not hog the disk when performing actions.
+#
+# default=true
+BackendSpawnIdleIO=true
+
+# Set the iopriority class of the spawned backend to idle for low priority tasks.
+# This ensures the process does not hog the disk when performing actions.
+#
+# default=true
+BackendSpawnIdleIOBackground=true
+
+# Set whether the spawned backends are allowed to be SIGKILLed if they do not
+# respond to SIGQUIT. This ensures that Cancel() works as expected, but
+# somtimes can corrupt databases if they are open.
+#
+# Only change this to FALSE if your backend can not be SIGKILLed without
+# database corruption.
+#
+# Even if this is set TRUE, the backend can still enforce this FALSE if it it
+# explicitly set in the compiled backend. You can think of this as a fallback
+# value that is used when backends do not enforce policy, or as a way to disable
+# SIGKILL even for backends that calim to support it.
+#
+# default=true
+BackendSpawnAllowSIGKILL=true
+
+# Default backends, as chosen in the configure script. This will be used
+# where no --backend="foo" option is given to the daemon.
+#
+# The order they are specified is the order they are tried, so for the
+# value "foo,bar" first "foo" will be attempted and then "bar" if the
+# libpk_backend_foo.so module load failed.
+#
+# default=yum
+DefaultBackend=presolve
+
+# Use syslog to audit and log actions where available.
+#
+# default=false
+UseSyslog=false
+
+# Proxy settings, uncomment as required
+#
+# NOTE: PackageKit does not use these settings, they are passed to backends.
+# Backends may ignore these values. If either of ProxyHTTP or ProxyFTP
+# are set then the users proxy settings are ignored.
+#
+# They are in the format username:password@server:port
+#
+# ProxyHTTP=username:password@server.lan:8080
+# ProxyFTP=server.lan:21
+
+# Scan installed desktop files when we update or install packages
+#
+# NOTE: Don't enable this for backends that are slow doing SearchFile()
+#
+# default=true
+ScanDesktopFiles=true
+
+# Update the package list when we refresh the cache
+#
+# NOTE: Don't enable this for backends that are slow doing GetPackages()
+#
+# default=true
+UpdatePackageList=true
+
+# Check for running processes when we update packages
+#
+# NOTE: Don't enable this for backends that are slow doing GetFiles() on
+# installed files.
+#
+# default=true
+UpdateCheckProcesses=true
+
+# Check for shared libraries that are in use, that are replaced by packages
+# that are marked as security updates.
+#
+# NOTE: Don't enable this for backends that are slow doing GetFiles() on
+# installed files.
+#
+# default=true
+CheckSharedLibrariesInUse=true
+
+# Check for updates in testing repositories when we check for updates
+#
+# NOTE: Don't enable this if you do not want testing updates to be checked
+# as this will increase the network bandwidth used.
+#
+# default=true
+CheckTestingRepos=true
+
+# Use update cache when possible to avoid using the backend
+#
+# NOTE: Enabling this reduces calls to the backend, although using the
+# SetHints(cache-age) parameter will return unpredicable results for
+# transactions.
+#
+# default=false
+UseUpdateCache=false
+
+# Use strict developer checking in the daemon
+#
+# This should be set to TRUE if the backend should be run in strict compliance
+# mode, which is useful when developing a backend. Normal sane users should not
+# have to use this mode.
+#
+# If this is set to FALSE, then the daemon will try to 'fix' any craziness in
+# the backend without notifying the end user.
+#
+# default=false
+DeveloperMode=false
+
+# The time in seconds to wait when we get the StateHasChanged method
+#
+# This should be used when a native tool has been used, and the update UIs
+# should be updated to reflect reality.
+#
+# default=30
+StateChangedTimeoutPriority=30
+
+# The time in seconds to wait after the computer has been resumed or any non
+# package related system event
+#
+# We don't want to be doing an update check at the busy time after a resume
+#
+# default=600
+StateChangedTimeoutNormal=600
+
+# The maximum number of requests a given user is able to request and queue
+#
+# Setting this lower decreases the risk of a local denial of service, but may
+# cause errors if the desktop client is doing many requests to the daemon in a
+# short period of time.
+#
+# default=500
+SimultaneousTransactionsForUid=500
+
+# The maximum number of items that can be resolved in one method
+#
+# Setting this lower decreases the risk of a local denial of service, but may
+# cause errors if the desktop client is trying to resolve a large number of
+# packages in one method.
+#
+# default=100
+MaximumItemsToResolve=100
+
+# The maximum number of packages that can be processed in one method
+#
+# Setting this lower decreases the risk of a local denial of service, but may
+# cause errors if the desktop client is trying to do a large transaction.
+#
+# default=2500
+MaximumPackagesToProcess=2500
+
+# How long the transaction is valid before it's destroyed, in seconds
+#
+# The client only has a finite amount of time to use the object, else it is
+# destroyed. Setting this longer will allow malicious clients to queue up large
+# number of authentication requests, but setting this shorter will reduce the
+# amount of time the user has to authenticate.
+#
+# default=300
+TransactionCreateCommitTimeout=300
+
+# How long the transaction should be queriable after it is finished, in seconds
+#
+# Give the client a few seconds to still query the transaction after it has
+# finished by keeping it on the bus. Setting this larger allows clients to query
+# the transaction without accessing the database, but increases memory usage.
+#
+# default=5
+TransactionKeepFinishedTimeout=5
+
+# If certain operations should be done using IDLE bandwidth
+#
+# TCP Low Priority is a congestion control algorithm included in the kernel.
+# Connections using this algorithm will use only idle bandwidth. In other words,
+# it is a self-tuning TCP stack. Setting this to FALSE will mean that the check
+# for updates happens more quickly, at the expense of other network applications
+# such as firefox and other file downloaders.
+#
+# If the user is running the network at 100% for extended periods of time, then
+# the update check may be starved and take a very long time to complete. In this
+# rare case, this setting should be set to FALSE.
+#
+# By also setting this setting to TRUE makes the possibility of a environment
+# mismatch much higher for a spawned backend. This will make switching from idle
+# operations (such as GetUpdates) and full speed operations (such as
+# InstallPackages) take longer. If this is a concern, then set this to FALSE.
+#
+# default=true
+UseIdleBandwidth=true
+
+# Processes that cannot be updated when they are running
+#
+# Some processes do not cope well when they are upgraded when the binary is
+# running. These include things like firefox, where updating causes the original
+# instance to misbehave as some components are not locked in memory.
+#
+# Applications can be added here that do not cope well with being updated.
+#
+# NOTE: you should not list applications here that the user has no permission
+# or cannot shutdown without the session exploding. For instance, listing
+# /sbin/dbus-daemon or /usr/sbin/haldaemon would be a really bad idea.
+#
+# Seporate entries can be seporated with the ';' character.
+#
+# default=/usr/lib/*/firefox
+NoUpdateProcessList=/usr/lib/*/firefox
+
+# If the backend should use threads to avoid blocking the daemon for other users
+#
+# The daemon, packagekitd, is shared by multiple users. Users are allowed to
+# create and send transactions when other transactions are being processed.
+# To do this, the backend action is created in a thread, but some libraries
+# notably libdbus and dbus-glib, are less threadsafe then they probably should
+# be.
+#
+# Only developers need to change this value, normally for debugging purposes.
+#
+# default=true
+UseThreadsInBackend=true
+
+# If a custom root should be used when installing packages
+#
+# A custom route can be used to install to a LTSP instance or a virtual machine
+# image, typically using chroot or by mounting an image using virt-inspector.
+#
+# Additional authentication is required to change the root from the default.
+#
+# Most users do not need to change this value, as you need to have setup a
+# native package database (e.g. the rpmdb) on the new root.
+#
+# default=/
+UseRoot=/
+