Commit from Sugar Labs: Translation System by user aputsiaq.: 403 of 403 messages translated (0 fuzzy).

1 files changed, 97 insertions, 81 deletions

diff --git a/po/da.po b/po/da.po
index 96a7dd2..89b3684 100644
--- a/po/da.po
+++ b/po/da.po
@@ -6,8 +6,8 @@ msgid ""
 msgstr ""
 "Project-Id-Version: PACKAGE VERSION\n"
 "Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2013-10-14 00:33-0400\n"
-"PO-Revision-Date: 2013-10-22 22:05+0200\n"
+"POT-Creation-Date: 2013-10-30 00:33-0400\n"
+"PO-Revision-Date: 2013-11-01 13:05+0200\n"
 "Last-Translator: Aputsiaq Niels <aj@isit.gl>\n"
 "Language-Team: LANGUAGE <LL@li.org>\n"
 "Language: da\n"
@@ -323,11 +323,11 @@ msgstr "Ekstra blokke til Butia-robotten"
 msgid "pin mode Butia"
 msgstr "pin-tilstand for Butia"
 
-#: taextras.py:139 taextras.py:339 taextras.py:508
+#: taextras.py:139 taextras.py:339 taextras.py:510
 msgid "pin"
 msgstr "fastgør"
 
-#: taextras.py:140 taextras.py:509
+#: taextras.py:140 taextras.py:511
 msgid "mode"
 msgstr "tilstand"
 
@@ -347,7 +347,7 @@ msgstr "læs værdien af en pin"
 msgid "write pin Butia"
 msgstr "skriv pin for Butia"
 
-#: taextras.py:145 taextras.py:512
+#: taextras.py:145 taextras.py:514
 msgid "value"
 msgstr "værdi"
 
@@ -375,7 +375,7 @@ msgstr "Angiv værdien af HØJ for digital pin."
 msgid "LOW"
 msgstr "LAV"
 
-#: taextras.py:152 taextras.py:524
+#: taextras.py:152 taextras.py:525
 msgid "Set LOW value for digital port."
 msgstr "Angiv værdien af LAV for digital port."
 
@@ -1473,187 +1473,196 @@ msgid "ERROR: Check the Arduino and the number of port."
 msgstr "FEJL: Tjek Arduiono'en og nummeret på porten."
 
 #: taextras.py:491
-msgid "ERROR: Value must be a number from 0 to 255."
-msgstr "FEJL: Værdi skal være et tal mellem 0 og 255."
+msgid "ERROR: Value must be a number from 0 to 1."
+msgstr "FEJL: Værdi skal være et tal mellem 0 og 1."
 
 #: taextras.py:492
+msgid "ERROR: Value must be a number from 0 to 180."
+msgstr "FEJL: Værdi skal være et tal mellem 0 og 180."
+
+#: taextras.py:493
 msgid "ERROR: Value must be either HIGH or LOW, 0 or 1"
 msgstr "FEJL: Værdiskal vær enten HØJ eller LAV, 0 eller 1"
 
-#: taextras.py:493
+#: taextras.py:494
 msgid "ERROR: The mode must be either INPUT, OUTPUT, PWM or SERVO."
 msgstr "FEJL: Tilstanden skal være enten INPUT, OUTPUT, PBM eller SERVO."
 
-#: taextras.py:494
+#: taextras.py:495
 msgid "ERROR: The value must be an integer."
 msgstr "FEJL: Værdien skal være et heltal."
 
-#: taextras.py:495
+#: taextras.py:496
 msgid "ERROR: The pin must be an integer."
 msgstr "FEJL: Pin skal være et heltal."
 
-#: taextras.py:496
+#: taextras.py:497
+msgid "ERROR: You must configure the mode for the pin."
+msgstr "FEJL: Du skal konfigurere tilstanden for pin'en"
+
+#: taextras.py:498
 msgid "arduino"
 msgstr "arduino"
 
-#: taextras.py:497
+#: taextras.py:499
 msgid "refresh Arduino"
 msgstr "genopfrisk Arduino"
 
-#: taextras.py:498
+#: taextras.py:500
 msgid "Search for connected Arduinos."
 msgstr "Søg efter tilsluttede Arduinoer."
 
-#: taextras.py:499
+#: taextras.py:501
 msgid "Arduino"
 msgstr "Arduino"
 
-#: taextras.py:500
+#: taextras.py:502
 msgid "set current Arduino board"
 msgstr "angiv nuværende Arduino-bræt"
 
-#: taextras.py:501
+#: taextras.py:503
 msgid "number of Arduinos"
 msgstr "antallet af Arduinoer"
 
-#: taextras.py:502
+#: taextras.py:504
 msgid "number of Arduino boards"
 msgstr "antallet af Arduino-bræt"
 
-#: taextras.py:503
+#: taextras.py:505
 msgid "Arduino name"
 msgstr "Arduino-navn"
 
-#: taextras.py:504
+#: taextras.py:506
 msgid "Get the name of an Arduino."
 msgstr "Hent navnet for en Arduino."
 
 #. TRANS: pin mode is used to specify the mode (INPUT, OUTPUT, etc)
 #. in which an I/O pin is being used.
-#: taextras.py:507
+#: taextras.py:509
 msgid "pin mode"
 msgstr "pin-tilstand"
 
-#: taextras.py:510
+#: taextras.py:512
 msgid "Select the pin function (INPUT, OUTPUT, PWM, SERVO)."
 msgstr "Vælg pin-funktionen (INPUT, OUTPUT, PBM, SERVO)."
 
-#: taextras.py:511
+#: taextras.py:513
 msgid "analog write"
 msgstr "analog skrivning"
 
-#: taextras.py:513
+#: taextras.py:515
 msgid "Write analog value in specified port."
 msgstr "Skriv analog værdi i angivet port."
 
-#: taextras.py:514
+#: taextras.py:516
 msgid "analog read"
 msgstr "analog læsning"
 
-#: taextras.py:515
-msgid ""
-"Read value from analog port. Value may be between 0 and 1023. Use Vref to "
-"determine voltage. For USB, volt=((read)*5)/1024) approximately."
-msgstr ""
-"Læs værdi for analog port. Værdi skal mellem 0 og 1023. Brug Vref til at "
-"fastslå spændingen. For USB, volt=((aflæs)*5)/1024) tilnærmelsesvis."
-
 #: taextras.py:517
+msgid "Read value from analog port. Value may be between 0 and 1."
+msgstr "Læs værdien fra analog port. Værdien skal være mellem 0 og 1."
+
+#: taextras.py:518
 msgid "digital write"
 msgstr "digital skrivning"
 
-#: taextras.py:518
+#: taextras.py:519
 msgid "Write digital value to specified port."
 msgstr "Værdi for digital skrivning for angivet port."
 
-#: taextras.py:519
+#: taextras.py:520
 msgid "digital read"
 msgstr "digital læsning"
 
-#: taextras.py:520
+#: taextras.py:521
 msgid "Read value from digital port."
 msgstr "Læs værdi fra digital port."
 
-#: taextras.py:521
+#: taextras.py:522
 msgid "Set HIGH value for digital port."
 msgstr "Angiv værdien af HØJ for digital port."
 
-#: taextras.py:522
+#: taextras.py:523
 msgid "Configure Arduino port for digital input."
 msgstr "Sæt Arduino-port til digitalt input."
 
-#: taextras.py:523
+#: taextras.py:524
 msgid "Configure Arduino port to drive a servo."
 msgstr "Angiv Arduino-port for at køre en servo."
 
-#: taextras.py:525
+#: taextras.py:526
 msgid "Configure Arduino port for digital output."
 msgstr "Sæt Arduino-port til digitalt output."
 
-#: taextras.py:526
+#: taextras.py:527
 msgid "Configure Arduino port for PWM (pulse-width modulation)."
 msgstr "Sæt Arduino-port til PBM (pulsbreddemodulation)."
 
-#: taextras.py:527
+#: taextras.py:528
 #, python-format
 msgid "Not found Arduino %s"
 msgstr "Ikke fundet - Arduino %s"
 
-#: taextras.py:528
+#: taextras.py:529
 msgid "The pin must be an integer"
 msgstr "Pin skal være et heltal"
 
-#: taextras.py:529
+#: taextras.py:530
 msgid "The device must be an integer"
 msgstr "Enheden skal være et heltal"
 
+#: taextras.py:531
+#, python-format
+msgid "Error loading %s board"
+msgstr "Fejl under indlæsning af %s-bræt"
+
 #. TRANS: plugin to control an ExpEyes device
-#: taextras.py:534
+#: taextras.py:536
 msgid "Palette of Expeyes blocks"
 msgstr "Palette af Expeyes-blokke"
 
 #. TRANS: Programmable voltage output
-#: taextras.py:536
+#: taextras.py:538
 msgid "set PVS"
 msgstr "angiv PVS"
 
-#: taextras.py:537
+#: taextras.py:539
 msgid "set programmable voltage output"
 msgstr "angiv programmerbar udgangseffekt på spænding"
 
 #. TRANS: Square wave 1 voltage output
-#: taextras.py:539
+#: taextras.py:541
 msgid "set SQR1 voltage"
 msgstr "angiv SQR1-spænding"
 
-#: taextras.py:540
+#: taextras.py:542
 msgid "set square wave 1 voltage output"
 msgstr "angiv udgangseffekt på spænding for firkantet kurve 1"
 
 #. TRANS: Square wave 2 voltage output
-#: taextras.py:542
+#: taextras.py:544
 msgid "set SQR2 voltage"
 msgstr "angiv SQR2-spænding"
 
-#: taextras.py:543
+#: taextras.py:545
 msgid "set square wave 2 voltage output"
 msgstr "angiv udgangseffekt på spænding for firkantet kurve 2"
 
 #. TRANS: Digital output level
-#: taextras.py:545
+#: taextras.py:547
 msgid "set OD1"
 msgstr "angiv OD1"
 
-#: taextras.py:546
+#: taextras.py:548
 msgid "set digital output level (OD1) low (0) or high (1)"
 msgstr "angiv niveau på digitalt output (OD1), lav (0) eller høj (1)"
 
 #. TRANS: Input 1 voltage level
-#: taextras.py:548
+#: taextras.py:550
 msgid "IN1 level"
 msgstr "IN1-niveau"
 
-#: taextras.py:549
+#: taextras.py:551
 msgid ""
 "returns 1 if IN1 voltage level >2.5 volts, 0 if IN1 voltage level <= 2.5 "
 "volts"
@@ -1662,11 +1671,11 @@ msgstr ""
 "2.5 volt"
 
 #. TRANS: Input 2 voltage level
-#: taextras.py:552
+#: taextras.py:554
 msgid "IN2 level"
 msgstr "IN2-niveau"
 
-#: taextras.py:553
+#: taextras.py:555
 msgid ""
 "returns 1 if IN2 voltage level >2.5 volts, 0 if IN2 voltage level <= 2.5 "
 "volts"
@@ -1675,11 +1684,11 @@ msgstr ""
 "2.5 volt"
 
 #. TRANS: Resistive sensor voltage level
-#: taextras.py:556
+#: taextras.py:558
 msgid "SEN level"
 msgstr "SEN-niveau"
 
-#: taextras.py:557
+#: taextras.py:559
 msgid ""
 "returns 1 if resistive sensor (SEN) voltage level > 2.5 volts, 0 if SEN "
 "voltage level <= 2.5 volts"
@@ -1687,24 +1696,24 @@ msgstr ""
 "returnerer 1 når spændingssensor (SEN) >2.5 volt, 0 når SEN-spændingsensor "
 "<= 2.5 volt"
 
-#: taextras.py:559
+#: taextras.py:561
 msgid "capture"
 msgstr "indfang"
 
-#: taextras.py:560
+#: taextras.py:562
 msgid "input"
 msgstr "input"
 
-#: taextras.py:561
+#: taextras.py:563
 msgid "samples"
 msgstr "stikprøver"
 
-#: taextras.py:562
+#: taextras.py:564
 msgid "interval"
 msgstr "interval"
 
 #. TRANS: MS is microseconds
-#: taextras.py:564
+#: taextras.py:566
 msgid ""
 "capture multiple samples from input at interval (MS); results pushed to FIFO"
 msgstr ""
@@ -1712,81 +1721,88 @@ msgstr ""
 "FIFO"
 
 #. TRANS: Analog input 1 voltage level
-#: taextras.py:567
+#: taextras.py:569
 msgid "A1"
 msgstr "A1"
 
-#: taextras.py:568
+#: taextras.py:570
 msgid "read analog input 1 voltage"
 msgstr "læs spænding for analog input 1"
 
 #. TRANS: Analog input 2 voltage level
-#: taextras.py:570
+#: taextras.py:572
 msgid "A2"
 msgstr "A2"
 
-#: taextras.py:571
+#: taextras.py:573
 msgid "read analog input 2 voltage"
 msgstr "læs spænding for analog input 2"
 
 #. TRANS: Read input 1 voltage
-#: taextras.py:573
+#: taextras.py:575
 msgid "IN1"
 msgstr "IN1"
 
-#: taextras.py:574
+#: taextras.py:576
 msgid "read input 1 voltage"
 msgstr "læs spænding fra input 1"
 
 #. TRANS: Read input 2 voltage
-#: taextras.py:576
+#: taextras.py:578
 msgid "IN2"
 msgstr "IN2"
 
-#: taextras.py:577
+#: taextras.py:579
 msgid "read input 2 voltage"
 msgstr "læs spænding fra input 2"
 
 #. TRANS: Read analog sensor input voltage
-#: taextras.py:579
+#: taextras.py:581
 msgid "SEN"
 msgstr "SEN"
 
-#: taextras.py:580
+#: taextras.py:582
 msgid "read analog sensor input voltage"
 msgstr "læs input-spænding fra analog sensor"
 
 #. TRANS: Read square wave 1 input voltage
-#: taextras.py:582
+#: taextras.py:584
 msgid "SQR1"
 msgstr "SQR1"
 
-#: taextras.py:583
+#: taextras.py:585
 msgid "read square wave 1 voltage"
 msgstr "læs spænding for firkantet bølge 1"
 
 #. TRANS: Read square wave 2 input voltage
-#: taextras.py:585
+#: taextras.py:587
 msgid "SQR2"
 msgstr "SQR2"
 
-#: taextras.py:586
+#: taextras.py:588
 msgid "read square wave 2 voltage"
 msgstr "læs spænding for firkantet bølge 2"
 
 #. TRANS: Read programmable voltage
-#: taextras.py:588
+#: taextras.py:590
 msgid "PVS"
 msgstr "PVS"
 
-#: taextras.py:589
+#: taextras.py:591
 msgid "read programmable voltage"
 msgstr "læs programmérbar spænding"
 
-#: taextras.py:590
+#: taextras.py:592
 msgid "Expeyes device not found"
 msgstr "Fandt ikke Expeyes-enhed"
 
+#~ msgid ""
+#~ "Read value from analog port. Value may be between 0 and 1023. Use Vref to "
+#~ "determine voltage. For USB, volt=((read)*5)/1024) approximately."
+#~ msgstr ""
+#~ "Læs værdi for analog port. Værdi skal mellem 0 og 1023. Brug Vref til at "
+#~ "fastslå spændingen. For USB, volt=((aflæs)*5)/1024) tilnærmelsesvis."
+
 #~ msgid "touch"
 #~ msgstr "berør"