style cleanup: prefer ' for strings

Tomeu prefers ' for strings, so let's use it wherever we don't have a good
reason to use ".

Reviewed-by: James Cameron <quozl@laptop.org>
Reviewed-by: Simon Schampijer <simon@laptop.org>
CC: Aleksey Lim <alsroot@member.fsf.org>

1 files changed, 51 insertions, 51 deletions

diff --git a/src/jarabe/model/network.py b/src/jarabe/model/network.py
index cfb04a6..4d999da 100644
--- a/src/jarabe/model/network.py
+++ b/src/jarabe/model/network.py
@@ -155,89 +155,89 @@ def get_error_by_reason(reason):
     if _nm_device_state_reason_description is None:
         _nm_device_state_reason_description = {
             NM_DEVICE_STATE_REASON_UNKNOWN:
-                _("The reason for the device state change is unknown."),
+                _('The reason for the device state change is unknown.'),
             NM_DEVICE_STATE_REASON_NONE:
-                _("The state change is normal."),
+                _('The state change is normal.'),
             NM_DEVICE_STATE_REASON_NOW_MANAGED:
-                _("The device is now managed."),
+                _('The device is now managed.'),
             NM_DEVICE_STATE_REASON_NOW_UNMANAGED:
-                _("The device is no longer managed."),
+                _('The device is no longer managed.'),
             NM_DEVICE_STATE_REASON_CONFIG_FAILED:
-                _("The device could not be readied for configuration."),
+                _('The device could not be readied for configuration.'),
             NM_DEVICE_STATE_REASON_CONFIG_UNAVAILABLE:
-                _("IP configuration could not be reserved "
-                  "(no available address, timeout, etc)."),
+                _('IP configuration could not be reserved '
+                  '(no available address, timeout, etc).'),
             NM_DEVICE_STATE_REASON_CONFIG_EXPIRED:
-                _("The IP configuration is no longer valid."),
+                _('The IP configuration is no longer valid.'),
             NM_DEVICE_STATE_REASON_NO_SECRETS:
-                _("Secrets were required, but not provided."),
+                _('Secrets were required, but not provided.'),
             NM_DEVICE_STATE_REASON_SUPPLICANT_DISCONNECT:
-                _("The 802.1X supplicant disconnected from "
-                  "the access point or authentication server."),
+                _('The 802.1X supplicant disconnected from '
+                  'the access point or authentication server.'),
             NM_DEVICE_STATE_REASON_SUPPLICANT_CONFIG_FAILED:
-                _("Configuration of the 802.1X supplicant failed."),
+                _('Configuration of the 802.1X supplicant failed.'),
             NM_DEVICE_STATE_REASON_SUPPLICANT_FAILED:
-                _("The 802.1X supplicant quit or failed unexpectedly."),
+                _('The 802.1X supplicant quit or failed unexpectedly.'),
             NM_DEVICE_STATE_REASON_SUPPLICANT_TIMEOUT:
-                _("The 802.1X supplicant took too long to authenticate."),
+                _('The 802.1X supplicant took too long to authenticate.'),
             NM_DEVICE_STATE_REASON_PPP_START_FAILED:
-                _("The PPP service failed to start within the allowed time."),
+                _('The PPP service failed to start within the allowed time.'),
             NM_DEVICE_STATE_REASON_PPP_DISCONNECT:
-                _("The PPP service disconnected unexpectedly."),
+                _('The PPP service disconnected unexpectedly.'),
             NM_DEVICE_STATE_REASON_PPP_FAILED:
-                _("The PPP service quit or failed unexpectedly."),
+                _('The PPP service quit or failed unexpectedly.'),
             NM_DEVICE_STATE_REASON_DHCP_START_FAILED:
-                _("The DHCP service failed to start within the allowed time."),
+                _('The DHCP service failed to start within the allowed time.'),
             NM_DEVICE_STATE_REASON_DHCP_ERROR:
-                _("The DHCP service reported an unexpected error."),
+                _('The DHCP service reported an unexpected error.'),
             NM_DEVICE_STATE_REASON_DHCP_FAILED:
-                _("The DHCP service quit or failed unexpectedly."),
+                _('The DHCP service quit or failed unexpectedly.'),
             NM_DEVICE_STATE_REASON_SHARED_START_FAILED:
-                _("The shared connection service failed to start."),
+                _('The shared connection service failed to start.'),
             NM_DEVICE_STATE_REASON_SHARED_FAILED:
-                _("The shared connection service quit or "
-                  "failed unexpectedly."),
+                _('The shared connection service quit or failed'
+                  ' unexpectedly.'),
             NM_DEVICE_STATE_REASON_AUTOIP_START_FAILED:
-                _("The AutoIP service failed to start."),
+                _('The AutoIP service failed to start.'),
             NM_DEVICE_STATE_REASON_AUTOIP_ERROR:
-                _("The AutoIP service reported an unexpected error."),
+                _('The AutoIP service reported an unexpected error.'),
             NM_DEVICE_STATE_REASON_AUTOIP_FAILED:
-                _("The AutoIP service quit or failed unexpectedly."),
+                _('The AutoIP service quit or failed unexpectedly.'),
             NM_DEVICE_STATE_REASON_MODEM_BUSY:
-                _("Dialing failed because the line was busy."),
+                _('Dialing failed because the line was busy.'),
             NM_DEVICE_STATE_REASON_MODEM_NO_DIAL_TONE:
-                _("Dialing failed because there was no dial tone."),
+                _('Dialing failed because there was no dial tone.'),
             NM_DEVICE_STATE_REASON_MODEM_NO_CARRIER:
-                _("Dialing failed because there was no carrier."),
+                _('Dialing failed because there was no carrier.'),
             NM_DEVICE_STATE_REASON_MODEM_DIAL_TIMEOUT:
-                _("Dialing timed out."),
+                _('Dialing timed out.'),
             NM_DEVICE_STATE_REASON_MODEM_DIAL_FAILED:
-                _("Dialing failed."),
+                _('Dialing failed.'),
             NM_DEVICE_STATE_REASON_MODEM_INIT_FAILED:
-                _("Modem initialization failed."),
+                _('Modem initialization failed.'),
             NM_DEVICE_STATE_REASON_GSM_APN_FAILED:
-                _("Failed to select the specified GSM APN."),
+                _('Failed to select the specified GSM APN'),
             NM_DEVICE_STATE_REASON_GSM_REGISTRATION_NOT_SEARCHING:
-                _("Not searching for networks."),
+                _('Not searching for networks.'),
             NM_DEVICE_STATE_REASON_GSM_REGISTRATION_DENIED:
-                _("Network registration was denied."),
+                _('Network registration was denied.'),
             NM_DEVICE_STATE_REASON_GSM_REGISTRATION_TIMEOUT:
-                _("Network registration timed out."),
+                _('Network registration timed out.'),
             NM_DEVICE_STATE_REASON_GSM_REGISTRATION_FAILED:
-                _("Failed to register with the requested GSM network."),
+                _('Failed to register with the requested GSM network.'),
             NM_DEVICE_STATE_REASON_GSM_PIN_CHECK_FAILED:
-                _("PIN check failed."),
+                _('PIN check failed.'),
             NM_DEVICE_STATE_REASON_FIRMWARE_MISSING:
-                _("Necessary firmware for the device may be missing."),
+                _('Necessary firmware for the device may be missing.'),
             NM_DEVICE_STATE_REASON_REMOVED:
-                _("The device was removed."),
+                _('The device was removed.'),
             NM_DEVICE_STATE_REASON_SLEEPING:
-                _("NetworkManager went to sleep."),
+                _('NetworkManager went to sleep.'),
             NM_DEVICE_STATE_REASON_CONNECTION_REMOVED:
                 _("The device's active connection was removed "
                   "or disappeared."),
             NM_DEVICE_STATE_REASON_USER_REQUESTED:
-                _("A user or client requested the disconnection."),
+                _('A user or client requested the disconnection.'),
             NM_DEVICE_STATE_REASON_CARRIER:
                 _("The device's carrier/link changed.")}
 
@@ -259,8 +259,8 @@ def frequency_to_channel(frequency):
             2452: 9, 2457: 10, 2462: 11, 2467: 12,
             2472: 13}
     if frequency not in ftoc:
-        logging.warning("The frequency %s can not be mapped to a channel, " \
-                            "defaulting to channel 1.", frequency)
+        logging.warning('The frequency %s can not be mapped to a channel, '
+            'defaulting to channel 1.', frequency)
         return 1
     return ftoc[frequency]
 
@@ -298,7 +298,7 @@ class WirelessSecurity(object):
 
 
 class Wireless(object):
-    nm_name = "802-11-wireless"
+    nm_name = '802-11-wireless'
 
     def __init__(self):
         self.ssid = None
@@ -321,7 +321,7 @@ class Wireless(object):
 
 
 class OlpcMesh(object):
-    nm_name = "802-11-olpc-mesh"
+    nm_name = '802-11-olpc-mesh'
 
     def __init__(self, channel, anycast_addr):
         self.channel = channel
@@ -329,12 +329,12 @@ class OlpcMesh(object):
 
     def get_dict(self):
         ret = {
-            "ssid": dbus.ByteArray("olpc-mesh"),
-            "channel": self.channel,
+            'ssid': dbus.ByteArray('olpc-mesh'),
+            'channel': self.channel,
         }
 
         if self.anycast_addr:
-            ret["dhcp-anycast-address"] = dbus.ByteArray(self.anycast_addr)
+            ret['dhcp-anycast-address'] = dbus.ByteArray(self.anycast_addr)
         return ret
 
 
@@ -737,7 +737,7 @@ class AccessPoint(gobject.GObject):
         else:
             fl |= 1 << 6
 
-        hashstr = str(fl) + "@" + self.name
+        hashstr = str(fl) + '@' + self.name
         return hash(hashstr)
 
     def _update_properties(self, properties):
@@ -915,7 +915,7 @@ def load_gsm_connection():
         except Exception:
             logging.exception('Error adding gsm connection to NMSettings.')
     else:
-        logging.exception("No gsm connection was set in GConf.")
+        logging.exception('No gsm connection was set in GConf.')
 
 
 def load_connections():