diff options
Diffstat (limited to 'soas-base.ks')
| -rw-r--r-- | soas-base.ks | 303 |
1 files changed, 4 insertions, 299 deletions
diff --git a/soas-base.ks b/soas-base.ks index ef152df..0000504 100644 --- a/soas-base.ks +++ b/soas-base.ks @@ -6,7 +6,9 @@ selinux --disabled firewall --disabled xconfig --startxonboot bootloader --timeout=1 -part / --size 1536 +#part / --size 1536 +# FIXME: bring down below 2G for 2G removable images +part / --size 3536 services --enabled=abrt,NetworkManager --disabled=acpid,auditd,cups,dnsmasq,exim,ip6tables,iptables,irda,kerneloops,mdmonitor,netfs,network,nfs,nfslock,nscd,portreserve,rpcbind,rpcgssd,rpcidmapd,sshd # We're on Rawhide now. Switch to F12 Alpha. @@ -17,7 +19,6 @@ repo --name=rawhide --baseurl=http://kojipkgs.fedoraproject.org/mash/rawhide-200 @base-x @core @hardware-support -kernel # save some space -cracklib-dicts @@ -113,309 +114,15 @@ generic-release-notes # bits to set up the livecd while anaconda has been removed here isomd5sum + %end %post -# FIXME: it'd be better to get this installed from a package -cat > /etc/rc.d/init.d/livesys << EOF -#!/bin/bash -# -# live: Init script for live image -# -# chkconfig: 345 00 99 -# description: Init script for live image. - -. /etc/init.d/functions - -if ! strstr "\`cat /proc/cmdline\`" liveimg || [ "\$1" != "start" ]; then - exit 0 -fi - -if [ -e /.liveimg-configured ] ; then - configdone=1 -fi - -exists() { - which \$1 >/dev/null 2>&1 || return - \$* -} - -touch /.liveimg-configured - -# mount live image -if [ -b \`readlink -f /dev/live\` ]; then - mkdir -p /mnt/live - mount -o ro /dev/live /mnt/live 2>/dev/null || mount /dev/live /mnt/live -fi - -livedir="LiveOS" -for arg in \`cat /proc/cmdline\` ; do - if [ "\${arg##live_dir=}" != "\${arg}" ]; then - livedir=\${arg##live_dir=} - return - fi -done - -# enable swaps unless requested otherwise -swaps=\`blkid -t TYPE=swap -o device\` -if ! strstr "\`cat /proc/cmdline\`" noswap && [ -n "\$swaps" ] ; then - for s in \$swaps ; do - action "Enabling swap partition \$s" swapon \$s - done -fi -if ! strstr "\`cat /proc/cmdline\`" noswap && [ -f /mnt/live/\${livedir}/swap.img ] ; then - action "Enabling swap file" swapon /mnt/live/\${livedir}/swap.img -fi - -mountPersistentHome() { - # support label/uuid - if [ "\${homedev##LABEL=}" != "\${homedev}" -o "\${homedev##UUID=}" != "\${homedev}" ]; then - homedev=\`/sbin/blkid -o device -t "\$homedev"\` - fi - - # if we're given a file rather than a blockdev, loopback it - if [ "\${homedev##mtd}" != "\${homedev}" ]; then - # mtd devs don't have a block device but get magic-mounted with -t jffs2 - mountopts="-t jffs2" - elif [ ! -b "\$homedev" ]; then - loopdev=\`losetup -f\` - if [ "\${homedev##/mnt/live}" != "\${homedev}" ]; then - action "Remounting live store r/w" mount -o remount,rw /mnt/live - fi - losetup \$loopdev \$homedev - homedev=\$loopdev - fi - - # if it's encrypted, we need to unlock it - if [ "\$(/lib/udev/vol_id -t \$homedev 2>/dev/null)" = "crypto_LUKS" ]; then - echo - echo "Setting up encrypted /home device" - plymouth ask-for-password --command="cryptsetup luksOpen \$homedev EncHome" - homedev=/dev/mapper/EncHome - fi - - # and finally do the mount - mount \$mountopts \$homedev /home - # if we have /home under what's passed for persistent home, then - # we should make that the real /home. useful for mtd device on liveuser - if [ -d /home/home ]; then mount --bind /home/home /home ; fi - [ -x /sbin/restorecon ] && /sbin/restorecon /home - if [ -d /home/liveuser ]; then USERADDARGS="-M" ; fi -} - -findPersistentHome() { - for arg in \`cat /proc/cmdline\` ; do - if [ "\${arg##persistenthome=}" != "\${arg}" ]; then - homedev=\${arg##persistenthome=} - return - fi - done -} - -if strstr "\`cat /proc/cmdline\`" persistenthome= ; then - findPersistentHome -elif [ -e /mnt/live/\${livedir}/home.img ]; then - homedev=/mnt/live/\${livedir}/home.img -fi - -# if we have a persistent /home, then we want to go ahead and mount it -if ! strstr "\`cat /proc/cmdline\`" nopersistenthome && [ -n "\$homedev" ] ; then - action "Mounting persistent /home" mountPersistentHome -fi - -# make it so that we don't do writing to the overlay for things which -# are just tmpdirs/caches -mount -t tmpfs -o mode=0755 varcacheyum /var/cache/yum -mount -t tmpfs tmp /tmp -mount -t tmpfs vartmp /var/tmp -[ -x /sbin/restorecon ] && /sbin/restorecon /var/cache/yum /tmp /var/tmp >/dev/null 2>&1 - -if [ -n "\$configdone" ]; then - exit 0 -fi - -# add soas user with no passwd -/usr/sbin/useradd -m -c "soas user" -G audio,wheel liveuser -/usr/bin/passwd -d liveuser - -# allow sudo for liveuser user -echo "%wheel ALL=(ALL) NOPASSWD: ALL" >> /etc/sudoers - -# don't start yum-updatesd for livecd boots -chkconfig --level 345 yum-updatesd off 2>/dev/null - -# turn off mdmonitor by default -chkconfig --level 345 mdmonitor off 2>/dev/null - -# turn off setroubleshoot on the live image to preserve resources -chkconfig --level 345 setroubleshoot off 2>/dev/null - -# don't do packagekit checking by default -gconftool-2 --direct --config-source=xml:readwrite:/etc/gconf/gconf.xml.defaults -s -t string /apps/gnome-packagekit/frequency_get_updates never >/dev/null -gconftool-2 --direct --config-source=xml:readwrite:/etc/gconf/gconf.xml.defaults -s -t string /apps/gnome-packagekit/frequency_get_upgrades never >/dev/null -gconftool-2 --direct --config-source=xml:readwrite:/etc/gconf/gconf.xml.defaults -s -t string /apps/gnome-packagekit/frequency_refresh_cache never >/dev/null -gconftool-2 --direct --config-source=xml:readwrite:/etc/gconf/gconf.xml.defaults -s -t bool /apps/gnome-packagekit/notify_available false >/dev/null -gconftool-2 --direct --config-source=xml:readwrite:/etc/gconf/gconf.xml.defaults -s -t bool /apps/gnome-packagekit/notify_distro_upgrades false >/dev/null -gconftool-2 --direct --config-source=xml:readwrite:/etc/gconf/gconf.xml.defaults -s -t bool /apps/gnome-packagekit/enable_check_firmware false >/dev/null -gconftool-2 --direct --config-source=xml:readwrite:/etc/gconf/gconf.xml.defaults -s -t bool /apps/gnome-packagekit/enable_check_hardware false >/dev/null -gconftool-2 --direct --config-source=xml:readwrite:/etc/gconf/gconf.xml.defaults -s -t bool /apps/gnome-packagekit/enable_codec_helper false >/dev/null -gconftool-2 --direct --config-source=xml:readwrite:/etc/gconf/gconf.xml.defaults -s -t bool /apps/gnome-packagekit/enable_font_helper false >/dev/null -gconftool-2 --direct --config-source=xml:readwrite:/etc/gconf/gconf.xml.defaults -s -t bool /apps/gnome-packagekit/enable_mime_type_helper false >/dev/null - - -# don't start cron/at as they tend to spawn things which are -# disk intensive that are painful on a live image -chkconfig --level 345 crond off 2>/dev/null -chkconfig --level 345 atd off 2>/dev/null -chkconfig --level 345 anacron off 2>/dev/null -chkconfig --level 345 readahead_early off 2>/dev/null -chkconfig --level 345 readahead_later off 2>/dev/null - -# Stopgap fix for RH #217966; should be fixed in HAL instead -touch /media/.hal-mtab - -# workaround clock syncing on shutdown that we don't want (#297421) -sed -i -e 's/hwclock/no-such-hwclock/g' /etc/rc.d/init.d/halt - -# and hack so that we eject the cd on shutdown if we're using a CD... -if strstr "\`cat /proc/cmdline\`" CDLABEL= ; then - cat >> /sbin/halt.local << FOE -#!/bin/bash -# we want to eject the cd on halt, but let's also try to avoid -# io errors due to not being able to get files... -cat /sbin/halt > /dev/null -cat /sbin/reboot > /dev/null -/usr/sbin/eject -p -m \$(readlink -f /dev/live) >/dev/null 2>&1 -echo "Please remove the CD from your drive and press Enter to finish restarting" -read -t 30 < /dev/console -FOE -chmod +x /sbin/halt.local -fi - -EOF - -# bah, hal starts way too late -cat > /etc/rc.d/init.d/livesys-late << EOF -#!/bin/bash -# -# live: Late init script for live image -# -# chkconfig: 345 99 01 -# description: Late init script for live image. - -. /etc/init.d/functions - -if ! strstr "\`cat /proc/cmdline\`" liveimg || [ "\$1" != "start" ] || [ -e /.liveimg-late-configured ] ; then - exit 0 -fi - -exists() { - which \$1 >/dev/null 2>&1 || return - \$* -} - -touch /.liveimg-late-configured - -# read some variables out of /proc/cmdline -for o in \`cat /proc/cmdline\` ; do - case \$o in - ks=*) - ks="\${o#ks=}" - ;; - xdriver=*) - xdriver="--set-driver=\${o#xdriver=}" - ;; - esac -done - -# this is a bad hack to work around #460581 for the geode -# purely to help move testing along for now -if [ \`grep -c Geode /proc/cpuinfo\` -ne 0 ]; then - cat > /etc/X11/xorg.conf <<FOE -Section "ServerLayout" - Identifier "Default Layout" - Screen 0 "Screen0" 0 0 - InputDevice "Keyboard0" "CoreKeyboard" -EndSection - -Section "InputDevice" -# keyboard added by rhpxl - Identifier "Keyboard0" - Driver "kbd" - Option "XkbModel" "pc105" - Option "XkbLayout" "us" -EndSection - -Section "Monitor" - Identifier "Monitor0" - HorizSync 30-67 - VertRefresh 48-52 - DisplaySize 152 114 - Mode "1200x900" - DotClock 57.275 - HTimings 1200 1208 1216 1240 - VTimings 900 905 908 912 - Flags "-HSync" "-VSync" - EndMode -EndSection - -Section "Device" - Identifier "Videocard0" - Driver "amd" - VendorName "Advanced Micro Devices, Inc." - BoardName "AMD Geode GX/LX" - - Option "AccelMethod" "EXA" - Option "NoCompression" "true" - Option "MigrationHeuristic" "greedy" - Option "PanelGeometry" "1200x900" -EndSection - -Section "Screen" - Identifier "Screen0" - Device "Videocard0" - Monitor "Monitor0" - DefaultDepth 16 - SubSection "Display" - Depth 16 - Modes "1200x900" - EndSubSection -EndSection -FOE - -echo "Xft.dpi: 150" > /home/liveuser/.Xresources - -fi - -# if liveinst or textinst is given, start anaconda -if strstr "\`cat /proc/cmdline\`" liveinst ; then - plymouth --quit - /usr/sbin/liveinst \$ks -fi -if strstr "\`cat /proc/cmdline\`" textinst ; then - plymouth --quit - /usr/sbin/liveinst --text \$ks -fi - -# configure X, allowing user to override xdriver -if [ -n "\$xdriver" ]; then - exists system-config-display --noui --reconfig --set-depth=24 \$xdriver -fi - -EOF # workaround avahi segfault (#279301) touch /etc/resolv.conf /sbin/restorecon /etc/resolv.conf -chmod 755 /etc/rc.d/init.d/livesys -/sbin/restorecon /etc/rc.d/init.d/livesys -/sbin/chkconfig --add livesys - -chmod 755 /etc/rc.d/init.d/livesys-late -/sbin/restorecon /etc/rc.d/init.d/livesys-late -/sbin/chkconfig --add livesys-late - # work around for poor key import UI in PackageKit rm -f /var/lib/rpm/__db* rpm --import /etc/pki/rpm-gpg/RPM-GPG-KEY-fedora @@ -423,8 +130,6 @@ rpm --import /etc/pki/rpm-gpg/RPM-GPG-KEY-fedora # go ahead and pre-make the man -k cache (#455968) /usr/sbin/makewhatis -w -# save a little bit of space at least... -rm -f /boot/initrd* # make sure there aren't core files lying around rm -f /core* |