Commit from Sugar Labs: Translation System by user cjl.: 359 of 359 messages translated (0 fuzzy).

1 files changed, 368 insertions, 362 deletions

diff --git a/po/nl.po b/po/nl.po
index b4649d0..0a2172a 100644
--- a/po/nl.po
+++ b/po/nl.po
@@ -6,9 +6,9 @@ msgid ""
 msgstr ""
 "Project-Id-Version: PACKAGE VERSION\n"
 "Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2013-06-19 00:33-0400\n"
-"PO-Revision-Date: 2013-06-17 16:47+0200\n"
-"Last-Translator: whe <heppew@yahoo.com>\n"
+"POT-Creation-Date: 2013-07-20 00:34-0400\n"
+"PO-Revision-Date: 2013-08-07 00:19+0200\n"
+"Last-Translator: Chris <cjl@laptop.org>\n"
 "Language-Team: LANGUAGE <LL@li.org>\n"
 "Language: nl\n"
 "MIME-Version: 1.0\n"
@@ -47,416 +47,424 @@ msgstr "Kies een uitdaging"
 msgid "Amazonas Tortuga"
 msgstr "Amazoneschildpad"
 
-#: taextras.py:58
+#: taextras.py:56
+msgid "Turtle Flags"
+msgstr "Schildpad Vlaggen"
+
+#: taextras.py:57
+msgid "Use the turtle to draw country flags"
+msgstr "Gebruik het schildpad om de landenvlaggen"
+
+#: taextras.py:63
 msgid "Palette of Mexican pesos"
 msgstr "Palet van Mexicaanse pesos"
 
-#: taextras.py:59
+#: taextras.py:64
 msgid "Palette of Colombian pesos"
 msgstr "Palet van Colombiaanse pesos"
 
-#: taextras.py:60
+#: taextras.py:65
 msgid "Palette of Rwandan francs"
 msgstr "Palet van Rwandaanse franken"
 
-#: taextras.py:61
+#: taextras.py:66
 msgid "Palette of US dollars"
 msgstr "Palet van US dollars"
 
-#: taextras.py:62
+#: taextras.py:67
 msgid "Palette of Australian dollars"
 msgstr "Palet van Australische dollars"
 
-#: taextras.py:63
+#: taextras.py:68
 msgid "Palette of Paraguayan Guaranies"
 msgstr "Palet van Paraguayse Guaranies"
 
-#: taextras.py:64
+#: taextras.py:69
 msgid "Palette of Peruvian Nuevo Soles"
 msgstr "Palet van Peruviaanse Nuevo Soles"
 
-#: taextras.py:65
+#: taextras.py:70
 msgid "Palette of Uruguayan Pesos"
 msgstr "Paler van Uruguayse Pesos"
 
 #. TRANS: Butia is a Robot Project from Uruguay
 #. (http://www.fing.edu.uy/inco/proyectos/butia/)
-#: taextras.py:71
+#: taextras.py:76
 msgid "TurtleBots"
 msgstr "TurtleBots"
 
 #. TRANS: summary of TurtleBots activity
-#: taextras.py:73
+#: taextras.py:78
 msgid "TurtleBlocks with Butia, Lego NxT, WeDo, Arduino, FollowMe plugins"
 msgstr "TurtleBlokken met Butia, Lego NxT, WeDo, Arduino, FollowMe plugins"
 
-#: taextras.py:74
+#: taextras.py:79
 msgid "ERROR: The speed must be a value between 0 and 1023"
 msgstr "FOUT: De snelheid moet een waarde zijn tussen 0 en 1023"
 
-#: taextras.py:75
+#: taextras.py:80
 msgid "ERROR: The pin must be between 1 and 8"
 msgstr "FOUT: De pin moet zijn tussen 1 en 8"
 
-#: taextras.py:76
+#: taextras.py:81
 msgid "ERROR: The value must be 0 or 1, LOW or HIGH"
 msgstr "FOUT: De waarde moet zijn 0 of 1, LAAG of HOOG"
 
-#: taextras.py:77
+#: taextras.py:82
 msgid "ERROR: The mode must be INPUT or OUTPUT."
 msgstr "FOUT: De modus moet zijn INPUT of OUTPUT."
 
-#: taextras.py:78 taextras.py:79
+#: taextras.py:83 taextras.py:84
 msgid "turns LED on and off: 1 means on, 0 means off"
 msgstr "zet LED aan en uit: 1 is aan, 0 is uit"
 
-#: taextras.py:80
+#: taextras.py:85
 msgid "returns the gray level as a value between 0 and 65535"
 msgstr "geeft grijsniveau terug als waarde tussen 0 en 65536"
 
-#: taextras.py:81
+#: taextras.py:86
 msgid "returns 1 when the button is pressed and 0 otherwise"
 msgstr "geeft 1 terug als knop is ingedrukt en anders 0"
 
-#: taextras.py:82
+#: taextras.py:87
 msgid "returns the light level as a value between 0 and 65535"
 msgstr "geeft lichtniveau terug als waarde tussen 0 en 65536"
 
-#: taextras.py:83
+#: taextras.py:88
 msgid "returns the distance as a value between 0 and 65535"
 msgstr "geeft afstand terug als warde tussen 0 en 65536"
 
-#: taextras.py:84
+#: taextras.py:89
 msgid "returns the resistance value (ohms)"
 msgstr "geeft weerstandwaarde terug in Ohm"
 
-#: taextras.py:85
+#: taextras.py:90
 msgid "returns the voltage value (volts)"
 msgstr "geeft spanningswaarde terug in Volt"
 
-#: taextras.py:86
+#: taextras.py:91
 msgid "returns the temperature"
 msgstr "geeft de temperatuur terug"
 
-#: taextras.py:87
+#: taextras.py:92
 msgid "returns 1 when the sensors detects a magnetic field, 0 otherwise"
 msgstr "geeft een 1 als de sensors een magnetisch veld waarneemt, anders 0"
 
-#: taextras.py:88
+#: taextras.py:93
 msgid "LED"
 msgstr "LED"
 
-#: taextras.py:89
+#: taextras.py:94
 msgid "button"
 msgstr "knop"
 
-#: taextras.py:90 taextras.py:358
+#: taextras.py:95 taextras.py:363
 msgid "gray"
 msgstr "grijs"
 
-#: taextras.py:91 taextras.py:356
+#: taextras.py:96 taextras.py:361
 msgid "light"
 msgstr "licht"
 
-#: taextras.py:92
+#: taextras.py:97
 msgid "temperature"
 msgstr "temperatuur"
 
-#: taextras.py:93 taextras.py:330
+#: taextras.py:98 taextras.py:335
 msgid "distance"
 msgstr "afstand"
 
-#: taextras.py:94
+#: taextras.py:99
 msgid "resistance"
 msgstr "weerstand"
 
-#: taextras.py:95
+#: taextras.py:100
 msgid "voltage"
 msgstr "spanning"
 
-#: taextras.py:96
+#: taextras.py:101
 msgid "Butia Robot"
 msgstr "Butia Robot"
 
-#: taextras.py:97
+#: taextras.py:102
 msgid "refresh Butia"
 msgstr "ververs Butia"
 
-#: taextras.py:98
+#: taextras.py:103
 msgid "refresh the state of the Butia palette and blocks"
 msgstr "ververs de status vam de Butia palet en blokken"
 
 #. TRANS: This string is shorthand for "battery charge of Butia"
-#: taextras.py:100
+#: taextras.py:105
 msgid "battery charge Butia"
 msgstr "accu lading Butia"
 
-#: taextras.py:101
+#: taextras.py:106
 msgid ""
 "returns the battery charge in volts. If no motors present, it returns 255"
 msgstr ""
 "geeft de batterijlading in volt. Als geen motor aanwezig, dan geeft het 255"
 
 #. TRANS: This string is shorthand for "speed of Butia"
-#: taextras.py:103
+#: taextras.py:108
 msgid "speed Butia"
 msgstr "snelheid Butia"
 
-#: taextras.py:104
+#: taextras.py:109
 msgid "set the speed of the Butia motors"
 msgstr "stel de snelheid van de Butiamotoren in"
 
-#: taextras.py:105
+#: taextras.py:110
 msgid "move Butia"
 msgstr "beweeg Butia"
 
-#: taextras.py:106
+#: taextras.py:111
 msgid "left"
 msgstr "links"
 
-#: taextras.py:107
+#: taextras.py:112
 msgid "right"
 msgstr "rechts"
 
-#: taextras.py:108
+#: taextras.py:113
 msgid "moves the Butia motors at the specified speed"
 msgstr "beweegt de Butia motors met de gekozen snelheid"
 
-#: taextras.py:109
+#: taextras.py:114
 msgid "stop Butia"
 msgstr "stop Butia"
 
-#: taextras.py:110
+#: taextras.py:115
 msgid "stop the Butia robot"
 msgstr "stop de Butia robot"
 
 #. TRANS: This string is shorthand for "move Butia forward"
-#: taextras.py:112
+#: taextras.py:117
 msgid "forward Butia"
 msgstr "vooruit Butia"
 
-#: taextras.py:113
+#: taextras.py:118
 msgid "move the Butia robot forward"
 msgstr "beweeg de Butia robot vooruit"
 
 #. TRANS: This string is shorthand for "turn Butia left"
-#: taextras.py:115
+#: taextras.py:120
 msgid "left Butia"
 msgstr "links Butia"
 
-#: taextras.py:116
+#: taextras.py:121
 msgid "turn the Butia robot at left"
 msgstr "draai de Butia-robot naar links"
 
 #. TRANS: This string is shorthand for "turn Butia right"
-#: taextras.py:118
+#: taextras.py:123
 msgid "right Butia"
 msgstr "rechts Butia"
 
-#: taextras.py:119
+#: taextras.py:124
 msgid "turn the Butia robot at right"
 msgstr "draai de Butia robot naar rechts"
 
 #. TRANS: This string is shorthand for "move Butia backward"
-#: taextras.py:121
+#: taextras.py:126
 msgid "backward Butia"
 msgstr "achteruit Butia"
 
-#: taextras.py:122
+#: taextras.py:127
 msgid "move the Butia robot backward"
 msgstr "beweeg de Butia robot achteruit"
 
-#: taextras.py:123
+#: taextras.py:128
 msgid "Butia Robot extra blocks"
 msgstr "Butia Robot extra blokken"
 
-#: taextras.py:124
+#: taextras.py:129
 msgid "hack pin mode"
 msgstr "hack pin modus"
 
-#: taextras.py:125 taextras.py:293 taextras.py:459
+#: taextras.py:130 taextras.py:298 taextras.py:464
 msgid "pin"
 msgstr "speld"
 
-#: taextras.py:126 taextras.py:460
+#: taextras.py:131 taextras.py:465
 msgid "mode"
 msgstr "modus"
 
-#: taextras.py:127
+#: taextras.py:132
 msgid "Select the pin function (INPUT, OUTPUT)."
 msgstr "Selecteer de pin functie (INVOER, UITVOER)."
 
-#: taextras.py:128
+#: taextras.py:133
 msgid "write hack pin Butia"
 msgstr "schrijf hack pin Butia"
 
-#: taextras.py:129 taextras.py:463
+#: taextras.py:134 taextras.py:468
 msgid "value"
 msgstr "waarde"
 
-#: taextras.py:130
+#: taextras.py:135
 msgid "set a hack pin to 0 or 1"
 msgstr "stel een hack pin op 0 of 1"
 
-#: taextras.py:131
+#: taextras.py:136
 msgid "read hack pin Butia"
 msgstr "lees hack pin Butia"
 
-#: taextras.py:132
+#: taextras.py:137
 msgid "read the value of a hack pin"
 msgstr "lees de waarde van een hack pin"
 
-#: taextras.py:133 taextras.py:435
+#: taextras.py:138 taextras.py:440
 msgid "HIGH"
 msgstr "HOOG"
 
-#: taextras.py:134 taextras.py:472
+#: taextras.py:139 taextras.py:477
 msgid "Set HIGH value for digital port."
 msgstr "Zet HOOG waarde voor digitale poort."
 
-#: taextras.py:135 taextras.py:437
+#: taextras.py:140 taextras.py:442
 msgid "INPUT"
 msgstr "INVOER"
 
-#: taextras.py:136
+#: taextras.py:141
 msgid "Configure hack port for digital input."
 msgstr "Configureer hack poort voor digitale invoer."
 
-#: taextras.py:137 taextras.py:436
+#: taextras.py:142 taextras.py:441
 msgid "LOW"
 msgstr "LAAG"
 
-#: taextras.py:138 taextras.py:475
+#: taextras.py:143 taextras.py:480
 msgid "Set LOW value for digital port."
 msgstr "Zet LAAG waarde voor digitale poort."
 
-#: taextras.py:139 taextras.py:438
+#: taextras.py:144 taextras.py:443
 msgid "OUTPUT"
 msgstr "UITVOER"
 
-#: taextras.py:140
+#: taextras.py:145
 msgid "Configure hack port for digital output."
 msgstr "Configureer hack poort voor digitale uitvoer."
 
-#: taextras.py:141
+#: taextras.py:146
 msgid "Butia"
 msgstr "Butia"
 
-#: taextras.py:142
+#: taextras.py:147
 #, python-format
 msgid "ERROR: The pin %s must be in OUTPUT mode."
 msgstr "FOUT: De pin %s moet zijn in OUTPUT modus."
 
-#: taextras.py:143
+#: taextras.py:148
 #, python-format
 msgid "ERROR: The pin %s must be in INPUT mode."
 msgstr "FOUT: De pin %s moet zijn in INPUT modus."
 
-#: taextras.py:147
+#: taextras.py:152
 msgid "Error importing Pygame. This plugin require Pygame 1.9"
 msgstr "Fout bij het importeren van Pygame. Deze plugin vereist Pygame 1.9"
 
-#: taextras.py:148
+#: taextras.py:153
 msgid "Error on initialization of the camera"
 msgstr "Fout bij initialisatie van de camera"
 
-#: taextras.py:149
+#: taextras.py:154
 msgid "No camera was found"
 msgstr "Geen camera gevonden"
 
-#: taextras.py:150
+#: taextras.py:155
 msgid "Error stopping camera"
 msgstr "Fout bij stoppen camera"
 
-#: taextras.py:151
+#: taextras.py:156
 msgid "Error starting camera"
 msgstr "Fout bij starten camera"
 
 #. TRANS: The "mask" is used to restrict processing to a region in the image
-#: taextras.py:153
+#: taextras.py:158
 msgid "Error in get mask"
 msgstr "Fout in geef masker"
 
-#: taextras.py:154
+#: taextras.py:159
 msgid "FollowMe"
 msgstr "VolgMe"
 
-#: taextras.py:155
+#: taextras.py:160
 msgid "refresh FollowMe"
 msgstr "ververs VolgMij"
 
-#: taextras.py:156
+#: taextras.py:161
 msgid "Search for a connected camera."
 msgstr "Zoek naar een verbonden camera."
 
 #. TRANS: the calibration is used to match an RGB color to a target
-#: taextras.py:158
+#: taextras.py:163
 msgid "calibration"
 msgstr "calibratie"
 
-#: taextras.py:159
+#: taextras.py:164
 msgid "store a personalized calibration"
 msgstr "bewaar een aangepaste calibratie"
 
-#: taextras.py:160
+#: taextras.py:165
 msgid "return a personalized calibration"
 msgstr "geeft terug een gepersonaliseerde calibratie"
 
-#: taextras.py:161
+#: taextras.py:166
 msgid "follow"
 msgstr "volg"
 
-#: taextras.py:162
+#: taextras.py:167
 msgid "follow a color or calibration"
 msgstr "volg een kleur of calibratie"
 
-#: taextras.py:163
+#: taextras.py:168
 msgid "brightness"
 msgstr "helderheid"
 
-#: taextras.py:164
+#: taextras.py:169
 msgid "set the camera brightness as a value between 0 to 255."
 msgstr "stel de helderheid van de camera in als een waarde tussen 0 en 255."
 
-#: taextras.py:165
+#: taextras.py:170
 msgid "minimum pixels"
 msgstr "minimum pixels"
 
-#: taextras.py:166
+#: taextras.py:171
 msgid "set the minimal number of pixels to follow"
 msgstr "stel een minimum aantal pixels in om te volgen"
 
-#: taextras.py:167
+#: taextras.py:172
 msgid "threshold"
 msgstr "drempel"
 
 #. TRANS: RGB color space (red, green, blue)
-#: taextras.py:169
+#: taextras.py:174
 msgid "set a threshold for a RGB color"
 msgstr "stel de drempel voor een RGB-kleur in"
 
-#: taextras.py:170
+#: taextras.py:175
 msgid "camera mode"
 msgstr "cameramodus"
 
 #. TRANS: RGB, YUV, and HSV are color spaces
-#: taextras.py:172
+#: taextras.py:177
 msgid "set the color mode of the camera: RGB; YUV or HSV"
 msgstr "stel de kleurmodus van de camera in: RGB, YUV of HSV"
 
-#: taextras.py:173
+#: taextras.py:178
 msgid "get brightness"
 msgstr "lees de helderheid"
 
-#: taextras.py:174
+#: taextras.py:179
 msgid "get the brightness of the ambient light"
 msgstr "lees de helderheid van het omgevingslicht"
 
-#: taextras.py:175
+#: taextras.py:180
 msgid "average color"
 msgstr "gemiddelde kleur"
 
-#: taextras.py:176
+#: taextras.py:181
 msgid ""
 "if set to 0 then color averaging is off during calibration; for other values "
 "it is on"
@@ -464,256 +472,256 @@ msgstr ""
 "indien ingesteld op 0, wordt de gemiddelde kleur niet berekend tijdens de "
 "kalibratie, bij andere waardes wel"
 
-#: taextras.py:178
+#: taextras.py:183
 msgid "x position"
 msgstr "x-positie"
 
-#: taextras.py:179
+#: taextras.py:184
 msgid "return x position"
 msgstr "geef x-positie"
 
-#: taextras.py:180
+#: taextras.py:185
 msgid "y position"
 msgstr "y-positie"
 
-#: taextras.py:181
+#: taextras.py:186
 msgid "return y position"
 msgstr "geef y-positie"
 
-#: taextras.py:182
+#: taextras.py:187
 msgid "pixels"
 msgstr "pixels"
 
-#: taextras.py:183
+#: taextras.py:188
 msgid "return the number of pixels of the biggest blob"
 msgstr "geef het aantal pixels van de grootste blob"
 
 #. TRANS: RGB color space (red, green, blue)
-#: taextras.py:185
+#: taextras.py:190
 msgid "set the color mode of the camera to RGB"
 msgstr "zet de kleurmodus van de camera op RGB"
 
 #. TRANS: YUV color space (luminance, chrominance)
-#: taextras.py:187
+#: taextras.py:192
 msgid "set the color mode of the camera to YUV"
 msgstr "zet de kleurmodus van de camera op YUV"
 
 #. TRANS: HSV color space (hue, saturation, value)
-#: taextras.py:189
+#: taextras.py:194
 msgid "set the color mode of the camera to HSV"
 msgstr "zet de kleurmodus van de camera op HSV"
 
-#: taextras.py:190
+#: taextras.py:195
 msgid "empty calibration"
 msgstr "lege kalibratie"
 
-#: taextras.py:191
+#: taextras.py:196
 msgid "error in string conversion"
 msgstr "fout in tekenreeksconversie"
 
 #. TRANS: Pattern detection is a plugin that allow detect signals
 #. with the camera
-#: taextras.py:197
+#: taextras.py:202
 msgid "Pattern detection"
 msgstr "Patroonherkenning"
 
-#: taextras.py:198
+#: taextras.py:203
 msgid "Seeing signal"
 msgstr "Signaal zien"
 
-#: taextras.py:199
+#: taextras.py:204
 msgid "Returns True if the signal is in front of the camera"
 msgstr "Geeft Waar als het signaal voor de camera is"
 
-#: taextras.py:200
+#: taextras.py:205
 msgid "Distance to signal"
 msgstr "Afstand tot signaal"
 
-#: taextras.py:201
+#: taextras.py:206
 msgid "Returns the distance of the signal to the camera in millimeters"
 msgstr "Geeft de afstand van het signaal tot de camera in millimeters"
 
 #. TRANS: SumBot is a robot programmed for "Sumo wrestling"
-#: taextras.py:206
+#: taextras.py:211
 msgid "SumBot"
 msgstr "SumBot"
 
-#: taextras.py:207
+#: taextras.py:212
 msgid "speed SumBot"
 msgstr "snelheid SumBot"
 
-#: taextras.py:208
+#: taextras.py:213
 msgid "submit the speed to the SumBot"
 msgstr "stuur de snelheid naar de SumBot"
 
-#: taextras.py:209
+#: taextras.py:214
 msgid "set the default speed for the movement commands"
 msgstr "stel de standaardsnelheid voor de bewegingsopdrachten in"
 
 #. TRANS: This string is shorthand for "move SumBot forward"
-#: taextras.py:211
+#: taextras.py:216
 msgid "forward SumBot"
 msgstr "voorwaarts SumBot"
 
-#: taextras.py:212
+#: taextras.py:217
 msgid "move SumBot forward"
 msgstr "verplaats de SumBot voorwaarts"
 
 #. TRANS: This string is shorthand for "move SumBot backward"
-#: taextras.py:214
+#: taextras.py:219
 msgid "backward SumBot"
 msgstr "achterwaarts SumBot"
 
-#: taextras.py:215
+#: taextras.py:220
 msgid "move SumBot backward"
 msgstr "verplaats SumBot achterwaarts"
 
-#: taextras.py:216
+#: taextras.py:221
 msgid "stop SumBot"
 msgstr "stop SumBot"
 
-#: taextras.py:217
+#: taextras.py:222
 msgid "stop the SumBot"
 msgstr "stop de SumBot"
 
 #. TRANS: This string is shorthand for "turn SumBot left"
-#: taextras.py:219
+#: taextras.py:224
 msgid "left SumBot"
 msgstr "links SumBot"
 
-#: taextras.py:220
+#: taextras.py:225
 msgid "turn left the SumBot"
 msgstr "draai SumBot naar links"
 
 #. TRANS: This string is shorthand for "move SumBot right"
-#: taextras.py:222
+#: taextras.py:227
 msgid "right SumBot"
 msgstr "rechts SumBot"
 
-#: taextras.py:223
+#: taextras.py:228
 msgid "turn right the SumBot"
 msgstr "draai SumBot naar rechts"
 
 #. TRANS: The angle to the center is the angle SumBot must turn to
 #. face the center of the playing field
-#: taextras.py:226
+#: taextras.py:231
 msgid "angle to center"
 msgstr "hoek tot midden"
 
 #. TRANS: dohyo is the playing field
-#: taextras.py:228
+#: taextras.py:233
 msgid "get the angle to the center of the dohyo"
 msgstr "geef de hoek naar het midden van het speelveld"
 
 #. TRANS: The angle to the center is the angle SumBot must turn to
 #. face the Enemy (opponent)
-#: taextras.py:231
+#: taextras.py:236
 msgid "angle to Enemy"
 msgstr "hoek naar Vijand"
 
-#: taextras.py:232
+#: taextras.py:237
 msgid "get the angle to the Enemy"
 msgstr "geef de afstand tot de Vijand"
 
 #. TRANS: This string is shorthand for "x coordinate of SumBot"
-#: taextras.py:234
+#: taextras.py:239
 msgid "x coor. SumBot"
 msgstr "x-coör. SumBot"
 
-#: taextras.py:235
+#: taextras.py:240
 msgid "get the x coordinate of the SumBot"
 msgstr "geef de x-coördinaat van de Sumbot"
 
 #. TRANS: This string is shorthand for "y coordinate of SumBot"
-#: taextras.py:237
+#: taextras.py:242
 msgid "y coor. SumBot"
 msgstr "y-coör. SumBot"
 
-#: taextras.py:238
+#: taextras.py:243
 msgid "get the y coordinate of the SumBot"
 msgstr "geef de y-coördinaat van de Sumbot"
 
 #. TRANS: This string is shorthand for "x coordinate of SumBot's enemy"
-#: taextras.py:240
+#: taextras.py:245
 msgid "x coor. Enemy"
 msgstr "x-coör. Vijand"
 
-#: taextras.py:241
+#: taextras.py:246
 msgid "get the x coordinate of the Enemy"
 msgstr "geef de x-coördinaat van de Vijand"
 
 #. TRANS: This string is shorthand for "y coordinate of SumBot's enemy"
-#: taextras.py:243
+#: taextras.py:248
 msgid "y coor. Enemy"
 msgstr "y-coör. Vijand"
 
-#: taextras.py:244
+#: taextras.py:249
 msgid "get the y coordinate of the Enemy"
 msgstr "geef de y-coördinaat van de Vijand"
 
 #. TRANS: This string is shorthand for "rotation of SumBot"
-#: taextras.py:246
+#: taextras.py:251
 msgid "rotation SumBot"
 msgstr "draaiing SumBot"
 
-#: taextras.py:247
+#: taextras.py:252
 msgid "get the rotation of the Sumbot"
 msgstr "geef de draaiing van de Sumbot"
 
 #. TRANS: This string is shorthand for "rotation of SumBot's enemy"
-#: taextras.py:249
+#: taextras.py:254
 msgid "rotation Enemy"
 msgstr "draaiing Vijand"
 
-#: taextras.py:250
+#: taextras.py:255
 msgid "get the rotation of the Enemy"
 msgstr "geef de draaiing van de Vijand"
 
-#: taextras.py:251
+#: taextras.py:256
 msgid "distance to center"
 msgstr "afstand tot het midden"
 
 #. TRANS: dohyo is the playing field
-#: taextras.py:253
+#: taextras.py:258
 msgid "get the distance to the center of the dohyo"
 msgstr "geef de afstand tot het midden van het speelveld"
 
-#: taextras.py:254
+#: taextras.py:259
 msgid "distance to Enemy"
 msgstr "afstand tot Vijand"
 
-#: taextras.py:255
+#: taextras.py:260
 msgid "get the distance to the Enemy"
 msgstr "geef de afstand tot de Vijand"
 
-#: taextras.py:256
+#: taextras.py:261
 msgid "update information"
 msgstr "informatie bijwerken"
 
-#: taextras.py:257
+#: taextras.py:262
 msgid "update information from the server"
 msgstr "informatie bijwerken vanaf de server"
 
 #. TRANS: Please use similar terms to those used in the Physics Activity
-#: taextras.py:262
+#: taextras.py:267
 msgid "Palette of physics blocks"
 msgstr "Palet van fysica-blokken"
 
-#: taextras.py:263
+#: taextras.py:268
 msgid "start polygon"
 msgstr "start veelhoek"
 
-#: taextras.py:264
+#: taextras.py:269
 msgid "Begin defining a new polygon based on the current Turtle xy position."
 msgstr ""
 "Begin een nieuwe veelhoek gebaseerd op de huidige xy-positie van de "
 "Schildpad."
 
-#: taextras.py:266
+#: taextras.py:271
 msgid "add point"
 msgstr "voeg punt toe"
 
-#: taextras.py:267
+#: taextras.py:272
 msgid ""
 "Add a new point to the current polygon based on the current Turtle xy "
 "position."
@@ -721,85 +729,85 @@ msgstr ""
 "Voeg een nieuw punt toe aan de huidige veelhoek gebaseerd op deze xy positie "
 "van het Schildpad."
 
-#: taextras.py:269
+#: taextras.py:274
 msgid "end polygon"
 msgstr "eind veelhoek"
 
-#: taextras.py:270
+#: taextras.py:275
 msgid "Define a new polygon."
 msgstr "Definieer een nieuwe veelhoek."
 
-#: taextras.py:271
+#: taextras.py:276
 msgid "end filled polygon"
 msgstr "eind gevulde veelhoek"
 
-#: taextras.py:272
+#: taextras.py:277
 msgid "Not a simple polygon"
 msgstr "Geen eenvoudige veelhoek"
 
-#: taextras.py:273
+#: taextras.py:278
 msgid "Define a new filled polygon."
 msgstr "Definieer een nieuwe gevulde veelhoek."
 
-#: taextras.py:274
+#: taextras.py:279
 msgid "triangle"
 msgstr "driehoek"
 
 #. TRANS: base of a triangle
-#: taextras.py:276
+#: taextras.py:281
 msgid "base"
 msgstr "basis"
 
-#: taextras.py:277 taextras.py:283
+#: taextras.py:282 taextras.py:288
 msgid "height"
 msgstr "hoogte"
 
-#: taextras.py:278
+#: taextras.py:283
 msgid "Add a triangle object to the project."
 msgstr "Voeg een driehoek voorwerp toe aan het project."
 
-#: taextras.py:279
+#: taextras.py:284
 msgid "circle"
 msgstr "cirkel"
 
-#: taextras.py:280
+#: taextras.py:285
 msgid "Add a circle object to the project."
 msgstr "Voeg een cirkel voorwerp toe aan het project."
 
-#: taextras.py:281
+#: taextras.py:286
 msgid "rectangle"
 msgstr "rechthoek"
 
-#: taextras.py:282
+#: taextras.py:287
 msgid "width"
 msgstr "breedte"
 
-#: taextras.py:284
+#: taextras.py:289
 msgid "Add a rectangle object to the project."
 msgstr "Voeg een rechthoek voorwerp toe aan het project."
 
-#: taextras.py:285
+#: taextras.py:290
 msgid "reset"
 msgstr "reset"
 
-#: taextras.py:286
+#: taextras.py:291
 msgid "Reset the project; clear the object list."
 msgstr "Reset het project, schoon de voorwerplijst."
 
-#: taextras.py:287
+#: taextras.py:292
 msgid "motor"
 msgstr "motor"
 
 #. TRANS: torque as in engine torque
-#: taextras.py:289
+#: taextras.py:294
 msgid "torque"
 msgstr "koppel"
 
-#: taextras.py:290
+#: taextras.py:295
 msgid "speed"
 msgstr "snelheid"
 
-#: taextras.py:291
+#: taextras.py:296
 msgid ""
 "Motor torque and speed range from 0 (off) to positive numbers; motor is "
 "placed on the most recent object created."
@@ -807,23 +815,23 @@ msgstr ""
 "Motor koppel en snelheid lopen van 0 (uit) naar positieve getallen; de motor "
 "wordt geplaatst op het meest recent gecreeerde voorwerp."
 
-#: taextras.py:294
+#: taextras.py:299
 msgid "Pin an object down so that it cannot fall."
 msgstr "Speld een voorwerp vast zodat het niet kan vallen."
 
-#: taextras.py:295
+#: taextras.py:300
 msgid "joint"
 msgstr "gewricht"
 
-#: taextras.py:296
+#: taextras.py:301
 msgid "x"
 msgstr "x"
 
-#: taextras.py:297
+#: taextras.py:302
 msgid "y"
 msgstr "y"
 
-#: taextras.py:298
+#: taextras.py:303
 msgid ""
 "Join two objects together (the most recent object created and the object at "
 "point x, y)."
@@ -831,39 +839,39 @@ msgstr ""
 "Voeg twee voorwerpen samen (het meest recent aangemaakte en het voorwerp op "
 "punt x, y)."
 
-#: taextras.py:300
+#: taextras.py:305
 msgid "save as Physics activity"
 msgstr "bewaar als Natuurkunde activiteit"
 
-#: taextras.py:301
+#: taextras.py:306
 msgid "Save the project to the Journal as a Physics activity."
 msgstr "Bewaar het project bij het Dagboek als Natuurkunde activiteit."
 
 #. TRANS: Here, gear means a toothed wheel, as in a clock-works
-#: taextras.py:303
+#: taextras.py:308
 msgid "gear"
 msgstr "versnelling"
 
-#: taextras.py:304
+#: taextras.py:309
 msgid "Add a gear object to the project."
 msgstr "Voeg een versnelling voorwerp toe aan het project."
 
-#: taextras.py:305
+#: taextras.py:310
 msgid "density"
 msgstr "dichtheid"
 
-#: taextras.py:306
+#: taextras.py:311
 msgid ""
 "Set the density property for objects (density can be any positive number)."
 msgstr ""
 "Stel de dichtheid eigenschap in voor voorwerpen (dichtheid kan ieder "
 "positief getal zijn)."
 
-#: taextras.py:308
+#: taextras.py:313
 msgid "friction"
 msgstr "wrijving"
 
-#: taextras.py:309
+#: taextras.py:314
 msgid ""
 "Set the friction property for objects (value from 0 to 1, where 0 turns "
 "friction off and 1 is strong friction)."
@@ -872,11 +880,11 @@ msgstr ""
 "wrijvingsloos is en 1 sterke wrijving)."
 
 #. TRANS: bounciness is coefficient of restitution
-#: taextras.py:312
+#: taextras.py:317
 msgid "bounciness"
 msgstr "stuiterbaarheid"
 
-#: taextras.py:313
+#: taextras.py:318
 msgid ""
 "Set the bounciness property for objects (a value from 0 to 1, where 0 means "
 "no bounce and 1 is very bouncy)."
@@ -885,11 +893,11 @@ msgstr ""
 "0 stuiterloos is en 1 sterk stuiteren)."
 
 #. TRANS: dynamic here means moving vs in a fixed position
-#: taextras.py:316
+#: taextras.py:321
 msgid "dynamic"
 msgstr "dynamiek"
 
-#: taextras.py:317
+#: taextras.py:322
 msgid ""
 "If dynamic = 1, the object can move; if dynamic = 0, it is fixed in position."
 msgstr ""
@@ -897,27 +905,27 @@ msgstr ""
 "vaste positie."
 
 #. TRANS: WeDo is a robotics product of the LEGO company
-#: taextras.py:323
+#: taextras.py:328
 msgid "Palette of WeDo blocks"
 msgstr "Palet van WeDo blokken"
 
-#: taextras.py:324
+#: taextras.py:329
 msgid "WeDo"
 msgstr "WeDo"
 
-#: taextras.py:325
+#: taextras.py:330
 msgid "set current WeDo device"
 msgstr "stel het huidige WeDo-apparaat in"
 
-#: taextras.py:326
+#: taextras.py:331
 msgid "number of WeDo devices"
 msgstr "aantal WeDo-apparaten"
 
-#: taextras.py:327
+#: taextras.py:332
 msgid "tilt"
 msgstr "hoogtehoek"
 
-#: taextras.py:328
+#: taextras.py:333
 msgid ""
 "tilt sensor output: (-1 == no tilt, 0 == tilt forward, 3 == tilt back, 1 == "
 "tilt left, 2 == tilt right)"
@@ -926,167 +934,167 @@ msgstr ""
 "achterwaarts, 1 == tilt links, 2 == tilt rechts)"
 
 #. TRANS: This string is shorthand for "output of the distance sensor"
-#: taextras.py:332
+#: taextras.py:337
 msgid "distance sensor output"
 msgstr "afstand sensor uitvoer"
 
-#: taextras.py:333
+#: taextras.py:338
 msgid "Motor A"
 msgstr "Motor A"
 
-#: taextras.py:334
+#: taextras.py:339
 msgid "returns the current value of Motor A"
 msgstr "geeft de huidige waarde van Motor A"
 
-#: taextras.py:335
+#: taextras.py:340
 msgid "Motor B"
 msgstr "Motor B"
 
-#: taextras.py:336
+#: taextras.py:341
 msgid "returns the current value of Motor B"
 msgstr "geeft de huidige waarde van Motor B"
 
-#: taextras.py:337
+#: taextras.py:342
 msgid "set the value for Motor A"
 msgstr "zet de waarde voor Motor A"
 
-#: taextras.py:338
+#: taextras.py:343
 msgid "set the value for Motor B"
 msgstr "zet de waarde voor Motor B"
 
-#: taextras.py:339
+#: taextras.py:344
 msgid "WeDo is unavailable"
 msgstr "WeDo is niet beschikbaar"
 
 #. TRANS: e.g., Wedo 2 is unavailable, defaulting to 1
-#: taextras.py:341
+#: taextras.py:346
 #, python-format
 msgid "WeDo %d is unavailable; defaulting to 1"
 msgstr "WeDo %d is niet beschikbaar; standaard 1 wordt gebruikt"
 
 #. TRANS: %(device)s and %(wedo_number)d are substitution strings;
 #. please leave untranslated
-#: taextras.py:344
+#: taextras.py:349
 #, python-format
 msgid "%(device)s is unavailable on WeDo %(wedo_number)d"
 msgstr "%(device)s is niet beschikbaar op WeDo %(wedo_number)d"
 
 #. TRANS: Lego NXT is a robotics product of the LEGO company
-#: taextras.py:349
+#: taextras.py:354
 msgid "Palette of LEGO NXT blocks of motors"
 msgstr "Palet van LEGO NXT blokken van motoren"
 
-#: taextras.py:350
+#: taextras.py:355
 msgid "Palette of LEGO NXT blocks of sensors"
 msgstr "Palet van LEGO NXT blokken van sensors"
 
 #. TRANS: touch sensor (implemented as a button)
-#: taextras.py:352
+#: taextras.py:357
 msgid "touch"
 msgstr "aanraken"
 
 #. TRANS: distance sensor (implemented using ultrasonics)
-#: taextras.py:354
+#: taextras.py:359
 msgid "ultrasonic"
 msgstr "ultrasoon"
 
-#: taextras.py:355
+#: taextras.py:360
 msgid "color"
 msgstr "kleur"
 
-#: taextras.py:357
+#: taextras.py:362
 msgid "sound"
 msgstr "geluid"
 
 #. TRANS: The brick is the NXT controller
-#: taextras.py:360
+#: taextras.py:365
 msgid "Please check the connection with the brick"
 msgstr "Gelieve de verbinding met het blok na te kijken"
 
-#: taextras.py:361
+#: taextras.py:366
 #, python-format
 msgid "Invalid port '%s'. Port must be: PORT A, B or C"
 msgstr "Ongeldige poort '%s'. Poort moet zijn: PORT A, B of C"
 
-#: taextras.py:362
+#: taextras.py:367
 #, python-format
 msgid "Invalid port '%s'. Port must be: PORT 1, 2, 3 or 4"
 msgstr "Ongeldige poort '%s'. Poort moet zijn: PORT 1, 2, 3 of 4"
 
-#: taextras.py:363
+#: taextras.py:368
 msgid "The value of power must be between -127 to 127"
 msgstr "De waarde van de energie moet tussen -127 en 127 liggen"
 
-#: taextras.py:364
+#: taextras.py:369
 #, python-format
 msgid "The parameter must be a integer, not '%s'"
 msgstr "De parameter moet een geheel nummer zijn, niet '%s'"
 
-#: taextras.py:365
+#: taextras.py:370
 msgid "An error has occurred: check all connections and try to reconnect"
 msgstr ""
 "Er deed zich een fout voor: kijk alle verbindingen na en probeer opnieuw"
 
-#: taextras.py:366
+#: taextras.py:371
 #, python-format
 msgid "NXT found %s bricks"
 msgstr "NXT vond %s blokken"
 
-#: taextras.py:367
+#: taextras.py:372
 msgid "NXT not found"
 msgstr "NXT niet gevonden"
 
-#: taextras.py:368
+#: taextras.py:373
 #, python-format
 msgid "Brick number %s was not found"
 msgstr "Blok nummer %s is niet gevonden"
 
-#: taextras.py:369
+#: taextras.py:374
 msgid "refresh NXT"
 msgstr "ververs NXT"
 
-#: taextras.py:370
+#: taextras.py:375
 msgid "Search for a connected NXT brick."
 msgstr "Zoek naar een verbonden NXT steen."
 
-#: taextras.py:371
+#: taextras.py:376
 msgid "NXT"
 msgstr "NXT"
 
-#: taextras.py:372
+#: taextras.py:377
 msgid "set current NXT device"
 msgstr "stel huidig NXT-apparaat in"
 
-#: taextras.py:373
+#: taextras.py:378
 msgid "number of NXT devices"
 msgstr "aantal NXT-apparaten"
 
-#: taextras.py:374
+#: taextras.py:379
 msgid "brick name"
 msgstr "bloknaam"
 
-#: taextras.py:375
+#: taextras.py:380
 msgid "Get the name of a brick."
 msgstr "Geef de naam van een blok."
 
-#: taextras.py:376
+#: taextras.py:381
 msgid "play tone"
 msgstr "speel toon"
 
-#: taextras.py:377
+#: taextras.py:382
 msgid "frequency"
 msgstr "frequentie"
 
-#: taextras.py:378
+#: taextras.py:383
 msgid "time"
 msgstr "tijd"
 
-#: taextras.py:379
+#: taextras.py:384
 msgid "Play a tone at frequency for time."
 msgstr "Speel een toon op frequrntie gedurende tijd."
 
 #. TRANS: turn is the action
-#: taextras.py:381
+#: taextras.py:386
 msgid ""
 "turn motor\n"
 "\n"
@@ -1094,24 +1102,24 @@ msgstr ""
 "draai motor\n"
 "\n"
 
-#: taextras.py:382
+#: taextras.py:387
 msgid "port"
 msgstr "poort"
 
-#: taextras.py:383
+#: taextras.py:388
 msgid "power"
 msgstr "macht"
 
 #. TRANS: rotations is quantity of turns
-#: taextras.py:385
+#: taextras.py:390
 msgid "rotations"
 msgstr "omwentelingen"
 
-#: taextras.py:386
+#: taextras.py:391
 msgid "turn a motor"
 msgstr "draai een motor"
 
-#: taextras.py:387
+#: taextras.py:392
 msgid ""
 "synchronize\n"
 "\n"
@@ -1121,39 +1129,39 @@ msgstr ""
 "\n"
 "motoren"
 
-#: taextras.py:388
+#: taextras.py:393
 msgid "steering"
 msgstr "sturen"
 
-#: taextras.py:389
+#: taextras.py:394
 msgid "synchronize two motors connected in PORT B and PORT C"
 msgstr "synchroniseer twee motoren verbonden met PORT B en PORT C"
 
-#: taextras.py:390
+#: taextras.py:395
 msgid "PORT A"
 msgstr "PORT A"
 
-#: taextras.py:391
+#: taextras.py:396
 msgid "PORT A of the brick"
 msgstr "PORT A van een steen"
 
-#: taextras.py:392
+#: taextras.py:397
 msgid "PORT B"
 msgstr "PORT B"
 
-#: taextras.py:393
+#: taextras.py:398
 msgid "PORT B of the brick"
 msgstr "PORT B van een steen"
 
-#: taextras.py:394
+#: taextras.py:399
 msgid "PORT C"
 msgstr "PORT C"
 
-#: taextras.py:395
+#: taextras.py:400
 msgid "PORT C of the brick"
 msgstr "PORT C van een steen"
 
-#: taextras.py:396
+#: taextras.py:401
 msgid ""
 "synchronize\n"
 "motors"
@@ -1161,221 +1169,219 @@ msgstr ""
 "synchroniseer\n"
 "motoren"
 
-#: taextras.py:397
+#: taextras.py:402
 msgid "start motor"
 msgstr "start motor"
 
-#: taextras.py:398
+#: taextras.py:403
 msgid "Run a motor forever."
 msgstr "Draai motor voor altijd."
 
-#: taextras.py:399
+#: taextras.py:404
 msgid "brake motor"
 msgstr "rem motor"
 
-#: taextras.py:400
+#: taextras.py:405
 msgid "Stop a specified motor."
 msgstr "Stop een opgegeven motor."
 
 #. TRANS: reset is used to reset the counter associated with the motor
-#: taextras.py:402
+#: taextras.py:407
 msgid "reset motor"
 msgstr "herstel motor"
 
-#: taextras.py:403
+#: taextras.py:408
 msgid "Reset the motor counter."
 msgstr "Herstel motor teller."
 
-#: taextras.py:404
+#: taextras.py:409
 msgid "motor position"
 msgstr "motor positie"
 
-#: taextras.py:405
+#: taextras.py:410
 msgid "Get the motor position."
 msgstr "Verkrijg de motor positie."
 
-#: taextras.py:406
+#: taextras.py:411
 msgid "PORT 1"
 msgstr "PORT 1"
 
-#: taextras.py:407
+#: taextras.py:412
 msgid "PORT 1 of the brick"
 msgstr "PORT 1 van de steen"
 
-#: taextras.py:408
+#: taextras.py:413
 msgid "read"
 msgstr "lees"
 
-#: taextras.py:409
+#: taextras.py:414
 msgid "sensor"
 msgstr "sensor"
 
-#: taextras.py:410
+#: taextras.py:415
 msgid "Read sensor output."
 msgstr "Lees sensor uitvier."
 
-#: taextras.py:411
+#: taextras.py:416
 msgid "PORT 2"
 msgstr "PORT 2"
 
-#: taextras.py:412
+#: taextras.py:417
 msgid "PORT 2 of the brick"
 msgstr "PORT 2 van de steen"
 
-#: taextras.py:413
+#: taextras.py:418
 msgid "light sensor"
 msgstr "lichtsensor"
 
-#: taextras.py:414
+#: taextras.py:419
 msgid "gray sensor"
 msgstr "grijssensor"
 
-#: taextras.py:415
+#: taextras.py:420
 msgid "PORT 3"
 msgstr "PORT 3"
 
-#: taextras.py:416
+#: taextras.py:421
 msgid "PORT 3 of the brick"
 msgstr "PORT 3 van de steen"
 
-#: taextras.py:417
+#: taextras.py:422
 msgid "touch sensor"
 msgstr "aanraak sensor"
 
-#: taextras.py:418
+#: taextras.py:423
 msgid "distance sensor"
 msgstr "afstandsensor"
 
-#: taextras.py:419
+#: taextras.py:424
 msgid "PORT 4"
 msgstr "PORT 4"
 
-#: taextras.py:420
+#: taextras.py:425
 msgid "PORT 4 of the brick"
 msgstr "PORT 4 van de steen"
 
-#: taextras.py:421
+#: taextras.py:426
 msgid "sound sensor"
 msgstr "geluid sensor"
 
-#: taextras.py:422
+#: taextras.py:427
 msgid "color sensor"
 msgstr "kleur sensor"
 
 #. TRANS: set light is used to set the light level associated with
 #. the color sensor (which can emit light as well as sense it)
-#: taextras.py:425
+#: taextras.py:430
 msgid "set light"
 msgstr "zet licht"
 
-#: taextras.py:426
+#: taextras.py:431
 msgid "Set color sensor light."
 msgstr "Zet kleur sensor light."
 
 #. TRANS: the battery level is the charge level of the brick
-#: taextras.py:428
+#: taextras.py:433
 msgid "battery level"
 msgstr "accu niveau"
 
-#: taextras.py:429
+#: taextras.py:434
 msgid "Get the battery level of the brick in millivolts"
 msgstr "Geef het batterijniveau van de steen in millivolt"
 
 #. TRANS: Arduino plugin to control an Arduino board
-#: taextras.py:434
-#, fuzzy
+#: taextras.py:439
 msgid "Palette of Arduino blocks"
-msgstr "Palet van WeDo blokken"
+msgstr "Palet van Arduino blokken"
 
 #. TRANS: PWM is pulse-width modulation
-#: taextras.py:440
+#: taextras.py:445
 msgid "PWM"
 msgstr "PWM"
 
-#: taextras.py:441
+#: taextras.py:446
 msgid "SERVO"
 msgstr "SERVO"
 
-#: taextras.py:442
+#: taextras.py:447
 msgid "ERROR: Check the Arduino and the number of port."
 msgstr "FOUT: Controleer de Arduino en het nummer van de poort."
 
-#: taextras.py:443
+#: taextras.py:448
 msgid "ERROR: Value must be a number from 0 to 255."
 msgstr "FOUT: Waarde moet zijn een getal van 0 tot 255."
 
-#: taextras.py:444
-#, fuzzy
+#: taextras.py:449
 msgid "ERROR: Value must be either HIGH or LOW, 0 or 1"
-msgstr "FOUT: Waarde moet zijn óf HOOG óf LAAG."
+msgstr "FOUT: Waarde moet zijn óf HOOG óf LAAG, 0 of 1."
 
-#: taextras.py:445
+#: taextras.py:450
 msgid "ERROR: The mode must be either INPUT, OUTPUT, PWM or SERVO."
 msgstr "FOUT: De nodus moet zijn INVOER, UITVOER, PWM of SERVO."
 
-#: taextras.py:446
+#: taextras.py:451
 msgid "ERROR: The value must be an integer."
-msgstr ""
+msgstr "FOUT: De waarde moet een geheel getal zijn."
 
-#: taextras.py:447
+#: taextras.py:452
 msgid "ERROR: The pin must be an integer."
-msgstr ""
+msgstr "FOUT: De pin moet een geheel getal zijn."
 
-#: taextras.py:448
+#: taextras.py:453
 msgid "refresh Arduino"
 msgstr "ververs Arduino"
 
-#: taextras.py:449
+#: taextras.py:454
 msgid "Search for connected Arduinos."
 msgstr "Zoek naar verbonden Arduino's."
 
-#: taextras.py:450
+#: taextras.py:455
 msgid "Arduino"
 msgstr "Arduino"
 
-#: taextras.py:451
+#: taextras.py:456
 msgid "set current Arduino board"
 msgstr "stel het huidig Arduino-bord in"
 
-#: taextras.py:452
+#: taextras.py:457
 msgid "number of Arduinos"
 msgstr "aantal Arduiono's"
 
-#: taextras.py:453
+#: taextras.py:458
 msgid "number of Arduino boards"
 msgstr "aantal Arduino-borden"
 
-#: taextras.py:454
+#: taextras.py:459
 msgid "Arduino name"
 msgstr "Arduino-naam"
 
-#: taextras.py:455
+#: taextras.py:460
 msgid "Get the name of an Arduino."
 msgstr "Geef de naam van een Arduino."
 
 #. TRANS: pin mode is used to specify the mode (INPUT, OUTPUT, etc)
 #. in which an I/O pin is being used.
-#: taextras.py:458
+#: taextras.py:463
 msgid "pin mode"
 msgstr "pinmodus"
 
-#: taextras.py:461
+#: taextras.py:466
 msgid "Select the pin function (INPUT, OUTPUT, PWM, SERVO)."
 msgstr "Selecteer de pin functie (INVOER, UITVOER, PWM, SERVO)."
 
-#: taextras.py:462
+#: taextras.py:467
 msgid "analog write"
 msgstr "analoog schrijven"
 
-#: taextras.py:464
+#: taextras.py:469
 msgid "Write analog value in specified port."
 msgstr "Schrijf analoge waarde in aangegeven poort."
 
-#: taextras.py:465
+#: taextras.py:470
 msgid "analog read"
 msgstr "analoog lezen"
 
-#: taextras.py:466
+#: taextras.py:471
 msgid ""
 "Read value from analog port. Value may be between 0 and 1023. Use Vref to "
 "determine voltage. For USB, volt=((read)*5)/1024) approximately."
@@ -1383,98 +1389,98 @@ msgstr ""
 "Lees waarde van analoge poort. Waarde mag zijn tussen 0 en 1023. Gebruik "
 "Vref om spanning te bepalen. Voor USB, volt=((lees)*5)/1024) ongeveer."
 
-#: taextras.py:468
+#: taextras.py:473
 msgid "digital write"
 msgstr "digitaal schrijven"
 
-#: taextras.py:469
+#: taextras.py:474
 msgid "Write digital value to specified port."
 msgstr "Schrijf digitale waarde naar aangegeven poort."
 
-#: taextras.py:470
+#: taextras.py:475
 msgid "digital read"
 msgstr "digitaal lezen"
 
-#: taextras.py:471
+#: taextras.py:476
 msgid "Read value from digital port."
 msgstr "Lees waarde van digitale poort."
 
-#: taextras.py:473
+#: taextras.py:478
 msgid "Configure Arduino port for digital input."
 msgstr "Configureer Arduino poort voor digitale invoer."
 
-#: taextras.py:474
+#: taextras.py:479
 msgid "Configure Arduino port to drive a servo."
 msgstr "Configureer Arduino poort om servo te besturen."
 
-#: taextras.py:476
+#: taextras.py:481
 msgid "Configure Arduino port for digital output."
 msgstr "Configureer Arduino poort voor digitale uitvoer."
 
-#: taextras.py:477
+#: taextras.py:482
 msgid "Configure Arduino port for PWM (pulse-width modulation)."
 msgstr "Configureer Arduino poort voor PWM (pulsbreedte modulatie)."
 
-#: taextras.py:478
+#: taextras.py:483
 #, python-format
 msgid "Not found Arduino %s"
-msgstr ""
+msgstr "Niet gevonden Arduino %s"
 
-#: taextras.py:479
+#: taextras.py:484
 msgid "The pin must be an integer"
-msgstr ""
+msgstr "De pen moet een geheel getal zijn"
 
-#: taextras.py:480
+#: taextras.py:485
 msgid "The device must be an integer"
-msgstr ""
+msgstr "Het apparaat moet een geheel getal zijn."
 
 #. TRANS: plugin to control an ExpEyes device
-#: taextras.py:485
+#: taextras.py:490
 msgid "Palette of Expeyes blocks"
 msgstr "Palet van Expeyes-blokken"
 
 #. TRANS: Programmable voltage output
-#: taextras.py:487
+#: taextras.py:492
 msgid "set PVS"
 msgstr "stel PVS in"
 
-#: taextras.py:488
+#: taextras.py:493
 msgid "set programmable voltage output"
 msgstr "stel programmeerbare stroomuitvoer in"
 
 #. TRANS: Square wave 1 voltage output
-#: taextras.py:490
+#: taextras.py:495
 msgid "set SQR1 voltage"
 msgstr "stel SQR1-stroomsterkte in"
 
-#: taextras.py:491
+#: taextras.py:496
 msgid "set square wave 1 voltage output"
 msgstr "stel blokgolf 1 spanningsuitvoer in"
 
 #. TRANS: Square wave 2 voltage output
-#: taextras.py:493
+#: taextras.py:498
 msgid "set SQR2 voltage"
 msgstr "stel SQR2 spanning in"
 
-#: taextras.py:494
+#: taextras.py:499
 msgid "set square wave 2 voltage output"
 msgstr "stel blokgolf 2 spanningsuitvoer in"
 
 #. TRANS: Digital output level
-#: taextras.py:496
+#: taextras.py:501
 msgid "set OD1"
 msgstr "stel OD1 in"
 
-#: taextras.py:497
+#: taextras.py:502
 msgid "set digital output level (OD1) low (0) or high (1)"
 msgstr "stel digitaal uitvoerniveau (OD1) laag (0) of hoog (1)"
 
 #. TRANS: Input 1 voltage level
-#: taextras.py:499
+#: taextras.py:504
 msgid "IN1 level"
 msgstr "IN1 niveau"
 
-#: taextras.py:500
+#: taextras.py:505
 msgid ""
 "returns 1 if IN1 voltage level >2.5 volts, 0 if IN1 voltage level <= 2.5 "
 "volts"
@@ -1483,11 +1489,11 @@ msgstr ""
 "volts"
 
 #. TRANS: Input 2 voltage level
-#: taextras.py:503
+#: taextras.py:508
 msgid "IN2 level"
 msgstr "IN2 niveau"
 
-#: taextras.py:504
+#: taextras.py:509
 msgid ""
 "returns 1 if IN2 voltage level >2.5 volts, 0 if IN2 voltage level <= 2.5 "
 "volts"
@@ -1496,11 +1502,11 @@ msgstr ""
 "volts"
 
 #. TRANS: Resistive sensor voltage level
-#: taextras.py:507
+#: taextras.py:512
 msgid "SEN level"
 msgstr "SEN niveau"
 
-#: taextras.py:508
+#: taextras.py:513
 msgid ""
 "returns 1 if resistive sensor (SEN) voltage level > 2.5 volts, 0 if SEN "
 "voltage level <= 2.5 volts"
@@ -1508,24 +1514,24 @@ msgstr ""
 "geeft 1 als weerstandssensor (SEN) spanningsniveau > 2.5 volts, 0 als SEN "
 "spanningsniveau <= 2.5 volts"
 
-#: taextras.py:510
+#: taextras.py:515
 msgid "capture"
 msgstr "opnemen"
 
-#: taextras.py:511
+#: taextras.py:516
 msgid "input"
 msgstr "invoer"
 
-#: taextras.py:512
+#: taextras.py:517
 msgid "samples"
 msgstr "voorbeelden"
 
-#: taextras.py:513
+#: taextras.py:518
 msgid "interval"
 msgstr "interval"
 
 #. TRANS: MS is microseconds
-#: taextras.py:515
+#: taextras.py:520
 msgid ""
 "capture multiple samples from input at interval (MS); results pushed to FIFO"
 msgstr ""
@@ -1533,78 +1539,78 @@ msgstr ""
 "naar FIFO"
 
 #. TRANS: Analog input 1 voltage level
-#: taextras.py:518
+#: taextras.py:523
 msgid "A1"
 msgstr "A1"
 
-#: taextras.py:519
+#: taextras.py:524
 msgid "read analog input 1 voltage"
 msgstr "lees analoge invoer 1 voltage"
 
 #. TRANS: Analog input 2 voltage level
-#: taextras.py:521
+#: taextras.py:526
 msgid "A2"
 msgstr "A2"
 
-#: taextras.py:522
+#: taextras.py:527
 msgid "read analog input 2 voltage"
 msgstr "lees analoge invoer 2 voltage"
 
 #. TRANS: Read input 1 voltage
-#: taextras.py:524
+#: taextras.py:529
 msgid "IN1"
 msgstr "IN1"
 
-#: taextras.py:525
+#: taextras.py:530
 msgid "read input 1 voltage"
 msgstr "lees invoer 1 voltage"
 
 #. TRANS: Read input 2 voltage
-#: taextras.py:527
+#: taextras.py:532
 msgid "IN2"
 msgstr "IN2"
 
-#: taextras.py:528
+#: taextras.py:533
 msgid "read input 2 voltage"
 msgstr "lees invoer 2 voltage"
 
 #. TRANS: Read analog sensor input voltage
-#: taextras.py:530
+#: taextras.py:535
 msgid "SEN"
 msgstr "SEN"
 
-#: taextras.py:531
+#: taextras.py:536
 msgid "read analog sensor input voltage"
 msgstr "lees analoge sensor invoer voltage"
 
 #. TRANS: Read square wave 1 input voltage
-#: taextras.py:533
+#: taextras.py:538
 msgid "SQR1"
 msgstr "SQR1"
 
-#: taextras.py:534
+#: taextras.py:539
 msgid "read square wave 1 voltage"
 msgstr "lees blokgolf 1 voltage"
 
 #. TRANS: Read square wave 2 input voltage
-#: taextras.py:536
+#: taextras.py:541
 msgid "SQR2"
 msgstr "SQR2"
 
-#: taextras.py:537
+#: taextras.py:542
 msgid "read square wave 2 voltage"
 msgstr "lees blokgolf 2 voltage"
 
 #. TRANS: Read programmable voltage
-#: taextras.py:539
+#: taextras.py:544
 msgid "PVS"
 msgstr "PVS"
 
-#: taextras.py:540
+#: taextras.py:545
 msgid "read programmable voltage"
 msgstr "lees programmeerbaar voltage"
 
-#: taextras.py:541
+#: taextras.py:546
 msgid "Expeyes device not found"
 msgstr "Expeyes apparaat niet gevonden"